SECTION 03 11 16
ARCHITECTURAL FORMLINERS
** NOTE TO SPECIFIER ** Spec Formliners, Inc.; Formliner products.
.
This section is based on the products of Spec Formliners, Inc., which is located at:
1038 E. 4th St.
Santa Ana, CA 92701
Toll Free Tel: 888-429-9550
Tel: 714-429-9500
Fax: 714-429-1460
Email: request info (drewdeering@specformliners.com)
Web: http://www.specformliners.com
[ Click Here ] for additional information.
As a leader in architectural formliners, Spec Formliners has become the benchmark for quality among all other formliner manufacturers. Spec Formliners has mastered the techniques required to produce the largest, most complex designs with the most relief of any formliner ever made. From 35 foot Bass with 16 inch of relief, to texture panels as large as 14 foot by 40 foot bonded to plywood, Spec Formliners has done it all. If you can design it, we can build it!
Built from 20 years of artisan-quality experience, our form liner patterns reproduce naturally occurring textures and unique designs for architectural concrete. We often use real rock to make rock patterns, for instance, and unique skills to join panels together with near seamless match points.
GENERAL
SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
Material:
Thermospec Single or Multi-Use Plastic
Elastospec Lite Semi-Elastomeric Multi-Use Material
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Pattern:
Fractured Fins.
Wood Grains.
Brick Patterns.
Block Patterns.
Rock Patterns.
Textured Patterns.
Smooth Flutes
Reveals
Geometric Patterns
RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
Section 03100 - Concrete Formwork.
Section 03120 - Architectural Cast-in-Place Concrete Formwork.
Section 03450 - Faced Architectural Precast Concrete.
Section 03460 - Site-Cast Concrete.
Section 03470 - Tilt-Up Concrete.
Section 09980 - Concrete and Masonry Coatings.
REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
ACI 117 - Tolerances for Concrete Construction and Materials.
ASTM D 412 - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers.
ASTM D 624 - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers.
ASTM D 638 - Standard Test Method for Tensile Properties of Plastics.
ASTM D 648 - Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position.
ASTM D 785 - Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials.
ASTM D 2240 - Standard Test Method for Rubber Property - Durometer Hardness.
ASTM D 2370 - Standard Test Method for Tensile Properties of Organic Coatings.
ASTM D 7905 - Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
SUBMITTALS
Submit under provisions of Section 01300.
Product Data: Manufacturer's data sheets on each product to be used, including:
Product sheets showing formliner name and pattern number.
Storage and handling requirements and recommendations.
Preparation instructions and recommendations.
Installation procedures.
Maintenance procedures.
Shop Drawings: Complete details of materials and installation, including but not limited to the following.
Patterns.
Formliner sheet sizes/accessory details.
Joint locations.
Installation sequence.
** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
Selection Samples: For a range of formliner types and patterns requested, submit two complete sets of samples representing manufacturer's textures and patterns.
Verification Samples: For each formliner type and pattern specified, two samples, minimum size 24 inches (610 mm) square, representing actual product, pattern and texture.
Manufacturer's Certificates: Certify products meet or exceed specified requirements.
QUALITY ASSURANCE
Single Source Requirements: Formliners and accessories shall be supplied from a single manufacturer.
Manufacturer Qualifications: Manufacturer shall have a minimum of ten years experience manufacturing formliners.
Installer Qualifications: Precast fabricator or cast-in-place, installer shall have a minimum of three years documented experience working with formliners.
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
Mock-Up: Construct a mock-up panel prior to the start of work to demonstrate the texture and pattern of formliners selected as well as the surface preparation techniques and craftsmanship of the installer and precast manufacturer.
Mock-up shall accurately demonstrate the formliner textures, patterns, and conditions (corners, false joints, etc.) expected in the completed work.
Install mock-up panel in area designated by Architect.
Construct mock-up using the exact procedures to be used in the full-scale construction.
Architect shall approve the texture, pattern, color, and workmanship of the mock-up panel prior to the beginning of concrete construction. Do not proceed with remaining work until workmanship, installation and operation are approved by Architect.
Mock-up panel shall remain on-site for comparison purposes during concrete construction or erection.
Installer or precast manufacturer shall remove and disposal of the mock-up panel following completion of the project.
DELIVERY, STORAGE, AND HANDLING
Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations.
Store products in manufacturer's unopened packaging indoors or in a cool dry place covered with black polyethylene sheeting until ready for installation.
Cover form liners when not in use to protect from water, oil, dirt and UV exposure. If building storage is not available, formliners shall be raised from the ground and covered securely with non-transparent, non-translucent, waterproof covers.
Store materials within absolute limits for temperature and humidity recommended by manufacturer. Liquid materials shall be stored in temperatures not exceeding 140 degrees F (60 degrees C) or falling below 32 degrees F (0 degrees C). Protect from damage.
Formliners are combustible, so keep them away from open flame or welding sparks, especially if the liners have been coated with any type of form release.
SEQUENCING
Ensure that locating templates and other information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.
Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
PROJECT CONDITIONS
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
PRODUCTS
MANUFACTURERS
Acceptable Manufacturer: Spec Formliners, Inc., which is located at:
1038 E. 4th St.
Santa Ana, CA 92701
Toll Free Tel: 888-429-9550
Tel: 714-429-9500
Fax: 714-429-1460
Email: request info (drewdeering@specformliners.com);Web: http://www.specformliners.com
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
Substitutions: Not permitted.
Requests for substitutions will be considered in accordance with provisions of Section 01600.
** NOTE TO SPECIFIER ** Select the formliner materials required from the following paragraphs and delete those not required.
MATERIALS
Thermospec Single or Multi-Use Plastic
Properties
Tensile ASTM D 638; HIPS 3700, ABS 5300
IFlexural ASTM D 7905; HIPS - , ABS 9300
Hardness ASTM D 785; HIPS - , ABS 105
Material Weights - lbs/ft2
0.070 MIL, 0.393
0.110 MIL, 0.621
0.150 MIL, 0.843
Thicknesses Available
0. 070
0.090
0.110
0.145
0.155
0.180
Elastospec Lite Semi-Elastomeric Multi-Use Material
Properties
Shore D ASTM D 2240; 400/90A
Tensile ASTM D 412; 1900 psi
IFlexural ASTM D 412; 300 percent
Hardness ASTM D 2370; 23 MPa
Material Weights - lbs/ft2
Varies by Pattern
Maximum Thicknesses
1/4 to 3/8 inch plus relief
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Properties
Shore D ASTM D 2240; 55-65
Tensile ASTM D 412; 1400 psi
Elongation ASTM D 638; 600 percent
Tear Strength ASTM D 624; 200 pli
Material Weights - lbs/ft2
Varies by Pattern
Maximum Thicknesses
1-1/8 inch plus relief
** NOTE TO SPECIFIER ** Select the Pattern(s) required from the following paragraphs; and delete those not required. Call for ThermoSpec Standard Panel Sizes on each pattern or for the availability of full height panels with no horizontal seams. Custom Patterns, and Art Panels are available in ElastoSpec.
FRACTURED FIN FORMLINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 1101 Standard Spec Rib
Description:
3/4 inch (19 mm) deep fractured fin.
1-1/2 inch (38 mm) pattern repeat.
Pattern Number: 1102 Corea Flute
Description:
1-3/4 inch (44 mm) deep fractured fin.
3 inch (76 mm) pattern repeat.
Pattern Number: 1103 Stanton Rib
Description:
1 inch (25 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
Pattern Number: 1104 Denver Rib
Description:
1-1/2 inch (38 mm) deep fractured fin.
3-3/8 inch (86 mm) pattern repeat.
Pattern Number: 1105 Las Vagas Rib
Description:
1 inch (25 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
Pattern Number: 1106 Dover Rib
Description:
1 inch (25 mm) deep fractured fin.
2-1/2 inch (64 mm) pattern repeat.
Pattern Number: 1106A Dover Flute
Description:
1-1/4 inch (31.75 mm) deep fractured fin.
2-1/2 inch (64 mm) pattern repeat.
Two 43.5 inch squares of rib in a 4 foot by 8 foot tool.
Pattern Number: 1106B Dover Flute
Description:
1 inch (25 mm) deep fractured fin.
2-1/2 inch (64 mm) pattern repeat.
Two 47 inch squares of rib in a 4 foot by 8 foot tool.
Pattern Number: 1106Wavy Dover Flute
Description:
1 inch (25 mm) deep fractured fin.
2-1/2 inch (64 mm) pattern repeat.
Pattern Number: 1107 Mission Flute
Description:
1-1/2 inch (38 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
Pattern Number: 1107 Custom
Description:
1-1/2 inch (38 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
13 inch (330 mm) right triangles
Material:
Thermospec Single or Multi-Use Plastic
Elastospec Lite Semi-Elastomeric Multi-Use Material
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Pattern Number: 1108 Washington Rib
Description:
1-1/4 inch (32 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
Material:
Thermospec Single or Multi-Use Plastic
Elastospec Lite Semi-Elastomeric Multi-Use Material
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Pattern Number: 1109 Abilene Rope
Description:
1-5/8 inch (41 mm) deep fractured fin.
4 inch (102 mm) pattern repeat.
Material:
Thermospec Single or Multi-Use Plastic
Elastospec Lite Semi-Elastomeric Multi-Use Material
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Pattern Number: 1110 Bush Rib
Description:
1-1/2 inch (38 mm) deep fractured fin.
3 inch (76 mm) pattern repeat.
Material:
Thermospec Single or Multi-Use Plastic
Elastospec Lite Semi-Elastomeric Multi-Use Material
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Pattern Number: 1111 Harbor Rib
Description:
1-1/2 inch (38 mm) deep fractured fin.
6 inch (152 mm) pattern repeat.
Material:
Thermospec Single or Multi-Use Plastic
Elastospec Lite Semi-Elastomeric Multi-Use Material
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Pattern Number: 1112 JLD Flute
Description:
5/8 inch (16 mm) deep fractured fin.
1 inch (25 mm) pattern repeat.
Material:
Thermospec Single or Multi-Use Plastic
Elastospec Lite Semi-Elastomeric Multi-Use Material
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Pattern Number: 1113 RECO Rib
Description:
5/8 inch (16 mm) deep fractured fin.
1-1/2 inch (38 mm) pattern repeat.
Material:
Thermospec Single or Multi-Use Plastic
Elastospec Lite Semi-Elastomeric Multi-Use Material
Elastospec 100% Solid Urethane Bonded to 3/4 inch Plywood
Pattern Number: 1114 Fractured Rope
Description:
1/2 inch (13 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
Pattern Number: 1115 Yumpa Rib
Description:
3/4 inch (19 mm) deep fractured fin.
8 inch (203 mm) pattern repeat.
Pattern Number: 1116 Jackson Rib
Description:
3/8 inch (10 mm) deep fractured fin.
1-1/4 inch (32 mm) pattern repeat.
Pattern Number: 1117 Split Face Rib
Description:
1 inch (25 mm) deep fractured fin.
4 inch (102 mm) pattern repeat.
Pattern Number: 1118 Ribbed Rope Rib
Description:
1 inch (25 mm) deep fractured fin.
4 inch (102 mm) pattern repeat.
Pattern Number: 1121 Rebar #6
Description:
1-1/4 inch (32 mm) deep fractured fin.
5.5 inch (138 mm) pattern repeat.
Pattern Number: 1123 Veddered Flute
Description:
1-1/2 inch (38 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
Pattern Number: 1124A Zaha Rib
Description:
1-1/2 inch (38 mm) deep fractured fin.
3-1/2 inch (89 mm) pattern repeat.
Pattern Number: 1124B Zaha Rib
Description:
1-1/2 inch (38 mm) deep fractured fin.
3-1/2 inch (89 mm) pattern repeat.
31 inches by 120 inches partial ribs in 31 inch direction.
Pattern Number: 1125 Galloway Rib
Description:
1-1/4 inch (32 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
Pattern Number: 1127 Extreme Fractured Rib
Description:
3/4 inch (19 mm) to 1-1/2 inch (38 mm) deep fractured fin.
2 inch (51 mm) pattern repeat.
Pattern Number: 1128 Utah Rib
Description:
5/8 inch (16 mm) relief.
1/2 inch 13 mm) peak and valley
1-7/8 inch (48 mm) C-C pattern repeat.
Ribs run in 4 foot direction
Pattern Number: 1130 Concord Rib
Description:
3/4 inch (19 mm) deep fractured fin.
1-1/2 inch (38 mm) pattern repeat.
Pattern Number: 1131 Boise Rib
Description:
3/4 inch (19 mm) deep fractured fin.
4 inch (102 mm) pattern repeat.
Pattern Number: 1132 Atlantic Rib
Description:
1-1/4 inch (32 mm) deep fractured fin.
4 inch (102 mm) pattern repeat.
Pattern Number: 1133 Pontiac Rib
Description:
1 inch (25 mm) deep fractured fin.
3-1/2 inch (88 mm) pattern repeat.
Pattern Number: 1140 Pontiac Rib
Description:
1-1/4 inch (32 mm) deep fractured fin.
3 inch (76 mm) pattern repeat.
Pattern Number: 1142 Long Island Rib
Description:
9/16 inch (15 mm) deep fractured fin.
1-9/16 inch (40 mm) pattern repeat.
Pattern Number: 1143 Florida Flute - Modified
Description:
1 inch (25 mm) deep fractured fin.
4 inch (102 mm) pattern repeat.
Pattern Number: 1146 Cimarron Rib
Description:
5/8 inch (16 mm) deep fractured fin.
3 inch (76 mm) pattern repeat.
Pattern Number: 1147 Napa Rib
Description:
1 inch (25 mm) deep fractured fin.
1-1/2 inch (38 mm) pattern repeat.
Pattern Number: 1149 Park Rib
Description:
1 inch (25 mm) deep fractured fin.
2-1/2 inch (63 mm) pattern repeat.
Pattern Number: 1153 Phoenix Rib
Description:
1-1/8 inch (29 mm) maximum deep vertical fractured fin with various width and depth ribs.
Pattern Number: 1154 Park Rib
Description:
3/8 inch (10 mm) relief.
3/4 inch (19 mm) squared peaks.
3/4 inch (19 mm) valleys.
1-1/2 inch (38 mm) C-C
Pattern Number: 1155 T-Rex Rib
Description:
7 inch (178 mm) wide fractured ribs.
9-5/8 inch (244 mm) C-C.
1-1/2 inch (38 mm) maximum relief.
Pattern Number: 1161 Honor Rib
Description:
1 inch (25 mm) maximum depth.
2 inch (51 mm) pattern repeat.
Pattern Number: 5127 1 inch Extreme Fractured Rib
Description:
1/2 (13 mm) to 1 inch (25 mm) extreme fractured fin.
2 inch (51 mm) pattern repeat.
WOOD GRAIN FORM LINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 1201 Rough Sawn 8 inch Wood
Description:
1 inch (25 mm) deep alternating high low wood grain pattern.
Pattern Number: 1202 Grape Stake
Description:
3/4 inch (19 mm) average relief.
2 inch (51 mm) heavy textured grape stake.
Pattern Number: 1203 Barnwood
Description:
Medium Wood Grain Texture with tight seams and butt joins.
Board Widths from 2-1/2 inch (64 mm) to 6-1/8 inch (156 mm).
Pattern Number: 1204 Random 3/8 inch Board
Description:
Board Widths from 5-1/4 inch (133 mm) to 9-1/4 inch (235 mm) with deep reveals.
Pattern Number: 1205 Smooth Ship Lap
Description:
6 inch (152 mm) board widths with 1/2 inch (13 mm) lap.
Pattern Number: 1207 Cedar Plank
Description:
4 inch (102 mm) cedar plank.
3/8 inch (10 mm) reveal between planks.
Pattern Number: 1208 Rough Sawn Random Boards
Description:
Medium textured wood planks 1-5/8 inch (41 mm) to 8-3/4 inch (222 mm) widths.
1/4 inch (6 mm) deep by 3/4 inch (19 mm) wide reveals.
Pattern Number: 1209 6 inch Pine Wood Grain
Description:
Board widths 5-3/4 inch (41 mm) with 1/4 inch (6 mm) deep by 3/4 inch (19 mm) wide reveals.
1/4 inch (6 mm) deep by 3/4 inch (19 mm) wide reveals.
Pattern Number: 1210 Random Pine Wood Grain
Description:
Medium textured wood planks 1-5/8 inch (41 mm) to 8-3/4 inch (222 mm) widths.
5/8 inch (16 mm) deep by 3/4 inch (19 mm) wide reveals.
Pattern Number: 1212 Light Wood Grain 581
Description:
3-1/2 inch (89 mm) widths.
1/4 inch (6 mm) protruding reveals.
Material:
Pattern Number: 1213 Weathered Tongue and Groove
Description:
7-1/2 inch (191 mm) widths.
1/2 inch (13 mm) by 1/4 (6 mm) reveal.
Pattern Number: 1214 Board and Batten
Description:
10 inch (191 mm) Weathered Barnboard Texture.
2 inch (51 mm) batten, 12 inch (305 mm) C-C 3/4 inch depth.
Pattern Number: 1215, 6 inch Woodgrain Shiplap
Description:
6 inch (152 mm) plank medium woodgrain texture with 3/4 inch (19 mm) relief.
Pattern Number: 1216 Weathered Woodgrain
Description:
4 inch (102 mm) wide plank
1/2 inch (13 mm) relief.
3/16 inch (5 mm), 1/4 inch (6 mm), to 1/2 inch (13 mm) high-low steps.
Pattern Number: 1217 Alternating Random Wood Plank
Description:
3/4 inch (19 mm) maximum depth.
1-3/4 inch (44 mm) to 7-1/2 inch 190 mm) wide wood planks.
Pattern Number: 1218 Rough Cut Board
Description:
1/8 inch (3 mm) maximum relief.
3 inch (76 mm) wide light wood grain planks.
Pattern Number: 1221 Stepped Wood Planks
Description:
1-1/2 inch (38 mm) wide planks.
1/4 inch (6 mm) to 3/4 inch (19 mm) maximum relief.
Pattern Number: 1222 Heavy Sawn Wood
Description:
1-3/4 inch (44 mm) to 5 inch (127 mm) planks with medium woodgrain surface texture.
1/4 inch (6 mm) maximum relief.
Pattern Number: 1224 Historic Wood Grain
Description:
5-1/2 inch (140 mm) pattern repeat with woodgrain texture and grout leakage.
1/8 inch (3 mm) to 3/16 inch (5 mm) relief.
Pattern Number: 1224_Plastic Historic Wood Grain
Description:
5-1/2 inch (140 mm) pattern repeat with woodgrain texture and grout leakage.
1/8 inch (3 mm) to 3/16 inch (5 mm) relief.
Pattern Number: 1226 Random Cedar Board Form
Description:
Hi-Lo Random board widths of 2-78 inch (73 mm) to 10-3/4 inch (273 mm) 1/2 inch (6 mm) depth in two steps.
Pattern Number: 1227 Spec Wood
Description:
3/4 inch (19 mm) maximum relief.
2-1/2 inch (64 mm) width squared ribs 12 inches (305 mm) C-C.
Pattern Number: 1231 Split Cedar Shingle
Description:
4 inch (102 mm) to 6 inch (152 mm) lap with 4 inch (102 mm) to 8 inch (204 mm) random shingles
1/2 inch (6 mm) depth.
Pattern Number: 1235 Wire Brush Grooved Textured Wood
Description:
Tongue and groove random plank lengths
Pattern Number: 1236 Native Wood
Description:
Medium grain texture, 7-1/2 inch (190 mm) planks protruding reveal, 45 inch (1143 mm) non-standard width.
Pattern Number: 1240, 6 inch Woodgrain Shiplap
Description:
6 inch (152 mm) plank medium woodgrain texture with 1 inch (25 mm) relief.
Pattern Number: 1242, Barnwood with Reveal
Description:
Random size barnwood board texture with 2-1/2 inch to 9? board widths.
Reveal depth from 1/4? to 9/16?
Pattern Number: 1244, Pirate Plank
Description:
1/4 inch (6mm) maximum relief
3 inch (76mm) wide planks
Pattern Number: 1245, California Board
Description:
0.25 inch depth
9 inch C-C
1 inch mortar joints
8 inch boards
Pattern Number: 1248, Wood Grain Reveal
Description:
Description:
1.50 inch depth
12 inch C-C
6 inch peaks
6 inch valleys
Pattern Number: 1249, Mendota Redwood
Description:
3.5 inch to 5.5 inch board width
0.25 inch depth
Pattern Number: 1250, 6 inch Rough Sawn Plank,
Description:
5.5 inch board width
0.75 inch depth
Pattern Number: 1251, 6 inch Tongue & Groove
Description:
0.25 inch depth
6 inch C-C
5.50 inch plank widths
0.50 inch mortar joints
Pattern Number: 1252, Weathered Barnwood
Description:
0.25 inch depth
Pattern Number: 1253, 6 inch Wood Plank with Reveal
Description:
6 inch board width
0.375 inch depth
Pattern Number: 1254, Rough Cedar Plank
Description:
4.36 inch width
0.125 inch depth
Pattern Number: 1255, Coyote Wood
Description:
6 inch board width
0.375 inch depth
Pattern Number: 1259, Cabin Board
Description:
0.1875 inch depth
6 inch C-C
0.125 inch mortar joints
Pattern Number: 1264, Seattle Ship Lap
Description:
0.50 inch depth
4 inch C-C
Pattern Number: 1265, Rockwood
Description:
0.50 inch depth
random curved flutes
Pattern Number: 1267, 8 inch Woodgrain Plank Ship Lap
Description:
0.50 inch depth
8 inch C-C
Pattern Number: 1268, LA Plank
Description:
3.25 inch pattern repeat
0.1875 inch max depth
Pattern Number: 1269, Knotty Plank
Description:
0.1875 inch depth
5.50 inch planks
0.0625 inch to 0.125 inch mortar joint
Pattern Number: 1272, Wood with Reveals
Description:
6 inch pattern repeat
0.25 inch max depth
BRICK FORMLINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 1301, Slump Block
Description:
4 inch by 16 inch brick size
0.375 inch depth
Pattern Number: 1302, Old Brick
Description:
3 inch by 8 inch brick size
0.1875 inch depth
Pattern Number: 1303, Standard Spec Smooth Brick
Description:
2.25 inch by 7.75 inch brick size
0.375 inch max depth
Pattern Number: 1305, Random Size Split Face Block
Description:
4 inch to 16 inch block sizes
1.125 inch depth
1.50 inch mortar joints
Pattern Number: 1306, 8 inch by 2-1/2 inch Smooth Brick
Description:
8 inch by 2.5 inch brick size
0.25 inch depth
Pattern Number: 1309, Richtex
Description:
3.6875 inch by 11.6875 inch brick size
0.125 inch depth
Pattern Number: 1311, 12 inch Used Brick Running Bond
Description:
2.5 inch by 11.5 inch brick size
0.375 inch depth
Pattern Number: 1314, Paraloam Brick
Description:
Running Bond with 2.50 inch by 9.50 inch brick sizes
0.3125 inch depth
0.50 inch mortar joints
Pattern Number: 1315, LIE Brick
Description:
11.625 inch by 3.625 inch brick sizes
0.50 inch depth
0.375 inch mortar joints
6 running bond coursings and 1 soldier coursing
Pattern Number: 1316, LIE Sawtooth Brick
Description:
5.60 inch C-C width
3 inch C-C height
Pattern Number: 1317, 3 inch by 10 inch Rough Wire Brick Running Bond
Description:
3 inch by 10 inch brick size
0.375 inch depth
Pattern Number: 1319, Weathered Brick
Description:
3.625 inch by 11.625 inch brick sizes
0.25 inch depth
0.375 inch mortar joints
Pattern Number: 1321, Vertical Stacked Brick
Description:
3.625 inch by 11.625 inch brick sizes
0.25 inch depth
0.375 inch mortar joints
Pattern Number: 1323, 4 inch by 12 inch Rough Wire Brick Running Bond
Description:
4 inch by 12 inch brick size
0.25 inch depth
Pattern Number: 1325, 3 inch by 8 inch Rough Brick Running Bond
Description:
2.5 inch by 7.625 inch brick size
0.1875 inch depth
Pattern Number: 1326, Aggrebrick
Description:
2.25 inch by 7.625 inch brick sizes
0.375 inch depth
0.375 inch vertical mortar joints
0.417 inch horizontal mortar joints
BLOCK PATTERN FORMLINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 1402, 12 inch by 12 inch Split Face Block
Description:
12 inch by 12 inch C-C split face block sizes - stacked bond
0.625 inch depth
0.375 inch mortar joints
Pattern Number: 1403, 8 inch by 8 inch Split Face Block
Description:
8 inch by 8 inch block size
0.75 inch depth
Pattern Number: 1404, 8 inch by 16 inch Standard CMU Block
Description:
8 inch by 16 inch block size
0.375 inch depth
Pattern Number: 1407, 8 inch by 16 inch Split Face Block
Description:
8 inch by 16 inch block size
0.375 inch depth
Pattern Number: 1408, CMU Sand Block
Description:
7.50 inch by 15.50 inch block sizes
0.375 inch depth
0.50 inch mortar joints
Pattern Number: 1409, 8 inch by 16 inch Split Face Stackend Bond
Description:
8 inch by 16 inch block size
0.375 inch depth
Pattern Number: 1413, 8 inch by 8 inch Standard CMU Block
Description:
8 inch by 8 inch block size
0.375 inch depth
Pattern Number: 1425, Canon Bond Block
Description:
random block size
1.5 inch depth
Pattern Number: 1426, American Smooth Face Block
Description:
15.50 inch by 3.50 inch smooth running block bond sizes
0.125 inch depth
0.50 inch mortar joints
Pattern Number: 1427, Custom Canon Bond Block
Description:
21 inch by 45 inch running block bond sizes
1.50 inch depth
3 inch mortar joints
Pattern Number: 1429, Split Rib Block
Description:
8 inch by 2.75 inch block size
0.75 inch depth
Pattern Number: 1430, Cranston Split Block
Description:
11.5 inch to 24 inch block size
1.5 inch depth
Pattern Number: 1431, LS Block
Description:
23.625 inch W by 15.625 inch H block sizes
0.375 inch depth
0.4375 inch mortar joints
Pattern Number: 1433, Mountain Creek Block
Description:
15.50 inch by 39.50 inch block sizes
1.50 inch depth
0.50 inch mortar joints
Pattern Number: 1439, 12 inch by 24 inch Smooth Face Block
Description:
23.625 inch W by 11.625 inch H block
0.375 inch max depth
24 inch horizontal C-C
12 inch vertical C-C
ROCK PATTERN FORMLINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 1501, Dry Stack Fieldstone
Description:
Rock width varies 3 inches to 18 inches.
1.5 inch depth
Pattern Number: 1502, Ashlar Stone
Description:
2.5 inch to 11 inch rock height
2.5 inch to 17 inch rock width
1.25 inch depth
Pattern Number: 1503, Red E Cobblestone
Description:
9 inch rock height
11 inch to 18 inch rock width
1.5 inch depth
Pattern Number: 1505, Madera Flagstone
Description:
7 inch to 24.5 inch rock height
7.5 inch to 24 inch rock width
1.75 inch depth
Pattern Number: 1506, Random Block Ashlar Stone
Description:
4 inch to 42 inch rock width
1.5 inch depth
1508, Large Dry Stack Fieldstone
Description:
2 inch to 6 inch rock height
5 inch to 23 inch rock width
1.25 inch depth
Pattern Number: 1510, Rocky Mountain Flagstone
Description:
4 inch to 40 inch rock width
2 inch depth
Pattern Number: 1511, Devil's Slide Strata
Description:
rock height varies
rock width varies
3 inch depth
Pattern Number: 1513, SC Fractured Granite
Description:
1 inch depth
Pattern Number: 1515, SC Ashlar
Description:
8.25 inch to 26 inch rock height
3.75 inch to 14 inch rock width
1.5 inch depth
0.75 inch mortar joint
Pattern Number: 1517, St. Mary's Ashlar
Description:
8.25 inch to 26 inch rock height
3.75 inch to 14 inch rock width
1.5 inch depth
Pattern Number: 1519, Tallahassee Ashlar
Description:
7 inch to 28 inch rock width
1 inch rock depth
Pattern Number: 1520, Batavia Random Fieldstone
Description:
3 inch to 26 inch rock width
2.5 inch depth
Pattern Number: 1521, Tahoka Stone
Description:
6.5 inch to 13 inch rock height
9 inch to 30 inch rock width
2 inch depth
Pattern Number: 1523, RE Ashlar
Description:
8 inch to 25.5 inch rock height
5 inch to 12 inch rock width
1.5 inch depth
Pattern Number: 1524, San Diego Dry Stack
Description:
3 inch to 7.50 inch rock heights
7.50 inch to 28 inch rock widths
1 inch depth
0.50 inch to 0.5625 inch mortar joints
Pattern Number: 1526, La Sierra Fieldstone
Description:
5 inch to 11 inch rock heights
6 inch to 29 inch rock widths
2 inch depth
0.50 inch to 0.75 inch mortar joints
Pattern Number: 1534, Large Running Bond Stone
Description:
7.25 inch to 22 inch rock width
1.5 inch depth
Pattern Number: 1535, Amboy Cut Stone
Description:
2 inch depth
Pattern Number: 1536, Mammoth Cobblestone
Description:
3 inch to 6 inch rock width
1.25 inch depth
1 Pattern Number: 537, Colorado Red Flagstone
Description:
5 inch to 30 inch rock height
2.5 inch to 13 inch rock width
1.5 inch depth
Pattern Number: 1538, Cut Textured Stone
1 Description:
6.5 inch to 56 inch rock height
13 inch rock width
1.5 inch depth
Pattern Number: 1541, Rush Creek Ashlar
Description:
up to 30 inch rock width
2 inch depth
Pattern Number: 1542, Portland Dry Stack
4 inch to 8 inch rock heights
5 inch to 24 inch rock widths
1.50 inch depth
0.75 inch mortar joints
Pattern Number: 1544, Ashlar Dry Stack
Description:
5 inch to 26 inch rock width
0.75 inch depth
1545, Kona Rock
Description:
5.25 inch to 18.5 inch rock height
5.5 inch by 17.25 inch rock width
0.75 inch depth
Pattern Number: 1546, American Cut Stone
Description:
14 inch rock heights
14 inch to 47 inch rock widths
3 inch depth
0.75 inch mortar joints
Pattern Number: 1547, Colorado Flagstone
Description:
8 inch to 14 inch rock width
2.5 inch depth
Pattern Number: 1548, Chester Dry Stack
Description:
5 inch to 26 inch rock width
1.75 inch to 2.5 inch depth
Pattern Number: 1549, Chiseled Limestone
Description:
12 inch rock height
24 inch rock width
1.5 inch depth
Pattern Number: 1550, Fractured Basalt
Description:
2 inch depth
Pattern matched edges
Pattern Number: 1553, Cut Ashlar
Description:
3.25 inch to 12 inch rock height
6 inch to 32 inch rock width
0.75 inch depth
Pattern Number: 1555, Navasota Ashlar Stone
Description:
1.65 depth
Varies to 30 inches
Pattern Number: 1556, Franklin Aged Ashlar
Description:
3 inch to 25.375 inch rock height
1 inch to 9.5 inch rock width
0.75 inch depth
Pattern Number: 1558, Liberty Dry Stack
Description:
3.5 inch to 25.25 inch rock height
1.5 inch to 10.5 inch rock width
1.375 inch depth
Pattern Number: 1570, Klamath Dry Stack
Description:
2 inch to 23.5 inch rock height
1.5 inch to 13.5 inch rock width
1 inch depth
Pattern Number: 1572, Ashlar Cobblestone
Description:
3 inch to 7.25 inch rock height
5.75 inch to 6 inch rock width
0.5 inch depth
Pattern Number: 1573, Independence Ashlar
Description:
10 inch to 33.5 inch rock width
1.5 inch depth
Pattern Number: 1577, Random Cobblestone
Description:
1-1/2 inch depth
0.75 inch mortar joint
3 inch to 8 inch rocks
Pattern Number: 1579, Summit Rock
Description:
3 inch to 18.25 inch rock height
2.75 inch to 9.5 inch rock width
1.25 inch depth
Pattern Number: 1580, Lincoln Dry Stack
Description:
1-3/8 inch depth
4 inch to 30 inch stones
Pattern Number: 1581, Washington Dry Stack
Description:
1.5 inch to 7 inch rock height
4 inch to 24 inch rock width
1 inch depth
Pattern Number: 1582, Stone Ground Granite
Description:
0.5 inch maximum relief
Pattern Number: 1585, Oneida Rectangular Stone
Description:
24 inch to 72 inch rock height
23 inch rock width
1.5 inch depth
Pattern Number: 1587, California Dry Stack
Description:
3 inch to 24 inch rock width
1.25 inch depth
Pattern Number: 1587A, California Dry Stack
Description:
3 inch to 24 inch rock width
1.25 inch depth
Pattern Number: 1587A / B California Dry Stack
Description:
3 inch to 24 inch rock width
1.25 inch depth
Pattern Number: 1587B California Dry Stack
Description:
3 inch to 24 inch rock width
1.25 inch depth
Pattern Number: 5501, American 12 inch by 24 inch Stone
Description:
11 inch rock heights
23 inch rock widths
1.625 inch depth
1 inch mortar joints
Pattern Number: 5502, American 24 inch by 48 inch Stone
Description:
23 inch rock heights
47 inch rock widths
1.625 inch depth
1 inch mortar joints
Pattern Number: 5503, American Stone
Description:
15/8 inch (41mm) deep rib
10 inch to 30 inch stones
6 inch coursing
Pattern Number: 5527, Cut Random Stone
Description:
2 inch (50mm) deep cut stone
3/4 inch mortar joint
14 inch coursing
Pattern Number: 5533, Keystone Ashlar
Description:
7 inch to 23 inch W x 3 inch to 14.4 inch H stones
1.25 inch depth
0.50 inch to 0.75 inch mortar joints
Pattern Number: 5535, Fall River Cut Stone
Description:
2 inch depth
1 inch mortar joints
Pattern Number: 5536, Cracked Limestone
Description:
1.50 inch depth
0.50 inch to 0.75 inch mortar joints
Pattern Number: 5537, Custom Random Fieldstone
Description:
8 inch to 24 inch rock sizes
0.75 inch depth
0.50 inch to 1 inch mortar joint
Pattern 1505 modified to 0.75 inch depth
Pattern Number: 5538, Arizona River Rock
Description:
4 inch to 12 inch rock heights
4 inch to 12 inch rock widths
1.50 inch depth
0.50 inch to 1 inch mortar joints
Pattern Number: 5550, Kane Long Stone
Description:
3.61 inch to 17.54 inch W by 3.61 inch to 7.61 inch H stones
0.50 inch maximum depth
0.25 inch maximum texture relief
0.39 inch mortar joint
Pattern Number: 5552, Colorado Granite
Description:
7 inch to 28 inch rock heights
5.50 inch to 18.50 inch rock widths
3.50 inch depth
0.50 inch to 0.75 inch mortar joints
Pattern Number: 5554A, Coastal Fieldstone A
Description:
1.60 inch to 20 inch W by 1.50 inch to 10.60 inch H rocks
Individual rock shapes may vary
1.50 inch maximum depth
Pattern Number: 5554B, Coastal Fieldstone B
Description:
1.60 inch to 20 inch W by 1.50 inch to 10.60 inch H rocks
Individual rock shapes may vary
1.50 inch maximum depth
Pattern Number: 5558, Custom Cobblestone
Description:
12 inch maximum stone size
2 inch maximum depth
Pattern Number: 5561, CG American Stone
Description:
1 inch relief.
7 inch vertical C-C
10 inch to 30 inch W stones
Pattern Number: 5563, Coastal Basalt
2 inch maximum relief
Pattern Number: 5566, Virginia Rock 2"
Description:
1/8 inch to 1 inch mortar joint
2 inch depth
6 inch to 30 inch width rocks
3-7/8 inch to 17-1/4 inch height rocks
Pattern Number: 5567, Virginia Rock 1"
1/8 inch to 1 inch mortar joint
1 inch depth
6 inch to 30 inch width rocks
3-7/8 inch to 17-1/4 inch height rocks
TEXTURED PATTERNS FORMLINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 1601, Light to Medium Sandblast
Description:
0.125 inch to .062 inch relief
Pattern Number: 1602, Heavy Sandblast
Description:
0.25 inch relief
Pattern Number: 1603, Bush Hammer
Description:
1 inch maximum depth, 25 percent smooth
Pattern Number: 1605, Broom/Rake Texture
Description:
0.0625 inch relief
Pattern Number: 1606, Random Large Aggregate
Description:
0.25 inch depth
0.75 inch rock size
Pattern Number: 1607, Riverbed Aggregate
Description:
0.1875 inch relief
Pattern Number: 1608, Split Slate
Description:
0.25 inch deep split slate
Pattern Number: 1609, 1 inch Round Stone
Description:
0.5 inch to 1.5 inch depth
0.5 inch rock size
Pattern Number: 1613, Fractured Concrete
Description:
0.75 inch relief
Pattern Number: 1614, Smooth Sheet
Description:
.0313 maximum relief
Pattern Number: 1615, Medium Bush Hammer
Description:
0.25 inch to 0.5 inch depth
0.375 inch plus or minus effect
Pattern Number: 1616, Stucco Texture
Description:
Trowelled stucco texture.
Pattern Number: 1617, Crushed Stone
Description:
Exposed aggregate crushed stone texture
Pattern Number: 1621, Tasman Slate
Description:
0.125 inch depth with V-Groove reveal
Pattern Number: 1626, Kleen Slate
Description:
0.75 inch relief
Pattern Number: 1628, Colorado Tile
Description:
0.375 inch relief
16 inch C-C tiles
0.375 inch mortar joint
Pattern Number: 1630,
Description:
0.125 inch relief
Pattern Number: 1632, Contee Granite
Description:
0.3125 inch relief
Pattern Number: 1634, KL Medium Sandblast
Description:
0.1875 inch relief
Pattern Number: 1636, Texas Sandblast
Description:
0.125 inch to 0.1875 inch relief
Pattern Number: 1637, Split Face Granite
Description:
0.50 inch average relief to 0.75 inch maximum relief
Pattern Number: 1651, Light Sandblast
Description:
0.0625 inch relief
Pattern Number: 1655, Striated Drag
Description:
1/8 inch (3mm) relief
SMOOTH FLUTES FORMLINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 1702, 302 Standard Spec Flute
Description:
1.5 inch depth
4 inch C-C
1.5 inch peak and valley
Pattern Number: 1703, Filmore Flute
Description:
1.5 inch depth
6 inch C-C
2 inch peak
3 inch valley
Pattern Number: 1704, 304 Standard Spec Flute
Description:
0.75 inch depth
2 inch C-C
0.75 inch peak and valley
Pattern Number: 1705, 305 Standard Spec Flute
Description:
0.5 inch depth
1.5 inch C-C
0.5 inch peak and valley
Pattern Number: 1706, 303 Standard Spec Flute
Description:
1.5 inch depth
2 inch C-C
0.5 inch peak and valley
Pattern Number: 1707, Lincoln Flute
Description:
0.75 inch depth
6 inch C-C
2.5 inch peak and valley
Pattern Number: 1708, 1/2 inch Sine Wave
Description:
Description:
0.5 inch depth
1 inch C-C
0.5 inch peak and valley
Pattern Number: 1709, Houston Flute
Description:
0.75 inch depth
1.5 inch C-C
0.5 inch peak and valley
Pattern Number: 1710, Connecticut Flute
Description:
0.5 inch depth
2 inch C-C
0.875 inch peak and valley
Pattern Number: 1712, Utah Flute
Description:
1.375 inch depth
6 inch C-C
2.5 inch peak and valley
Pattern Number: 1713, Colorado Flute
Description:
1.5 inch depth
3 inch C-C
1 inch peak and valley
Pattern Number: 1714, Wilson Flute
Description:
1 inch depth
2 inch C-C
0.75 inch peak and valley
Pattern Number: 1715, San Diego Flute
Description:
0.25 inch depth
0.594 inch C-C
0.25 inch peak and valley
Pattern Number: 1716, Waimea Flute
Description:
0.50 inch depth
8 inch C-C
7 inch peak
1 inch V-Groove valley
Pattern Number: 1717, Santa Fe Flute
Description:
1.5 inch depth
6 inch C-C
1.125 inch peak
3.875 inch valley
Pattern Number: 1718, Arizona DOT Random Flute
Description:
1.5 inch depth
random C-C
random peak and valley
Pattern Number: 1720, Taft Flute
Description:
1.5 inch depth
5 inch C-C
2.5 inch peak
1.5 inch valley
Pattern Number: 1721, 307 Standard Spec Flute
Description:
0.75 inch depth
4 inch C-C
2.5 inch peak
1.5 inch valley
Pattern Number: 1722, 1/4 inch Sine Wave
Description:
0.25 inch depth
0.5 inch C-C
Pattern Number: 1723, Wyoming Flute
Description:
0.5 inch depth
6 inch C-C
4.5 inch peak
0.5 inch valley
Pattern Number: 1724, Mesa Flute
Description:
1.5 inch depth
4.5 inch C-C
1 inch peak
2.5 inch valley
Pattern Number: 1725 Walters Flute
Description:
0.375 inch depth
1.50 inch C-C
0.75 inch squared peaks
0.75 inch valleys
Pattern Number: 1726, Orlando Flute
Description:
0.75 inch depth
3 inch C-C
1 inch peak
1.5 inch valley
Pattern Number: 1730, Colfax Flute
Description:
0.75 inch depth
3 inch C-C
1.5 inch peak
1 inch valley
Pattern Number: 1731, Random 3/16 inch Striation
Description:
0.1875 inch depth
random C-C
random peak and valley
Pattern Number: 1732, Random Reveal
Description:
1 inch depth
random C-C
random peak and valley
Pattern Number: 1734, Adrian Flute
Description:
0.75 inch depth
4 inch C-C
1.75 inch peak and valley
Pattern Number: 1738, 3/8 inch Flute
Description:
0.5 inch depth
1 inch C-C
0.375 inch peak and valley
Pattern Number: 1739, Gila Flute
Description:
1.25 inch depth
6 inch C-C
3.5 inch peak
1 inch valley
Pattern Number: 1740, See9
Description:
0.875 inch depth
2.667 inch C-C
Pattern Number: 1741, Perris Flute
Description:
0.75 inch depth
3 inch C-C
1 inch peak and valley
Pattern Number: 1744, Varying Striations
Description:
0.25 inch depth
C-C varies
peak and valley varies
Pattern Number: 1745, Standard Spec 309
Description:
0.75 inch depth
3 inch C-C
0.75 inch peak
1.75 inch valley
Pattern Number: 1751, MTU Flute
Description:
1 inch depth
2 inch C-C
0.5 inch peak and valley
Pattern Number: 1752, Long Ripple Rib Flute
Description:
0.0625 inch depth
0.375 inch C-C
Pattern Number: 1753, Narrow Rippled Rib
Description:
0.0625 inch depth
0.125 inch C-C
Pattern Number: 1760, Maui Flute
Description:
0.25 inch depth
1.5 inch C-C
0.625 inch peak
0.75 inch valley
Pattern Number: 1761, 1 inch Sine Wave
Description:
0.5 inch depth
2 inch C-C
Pattern Number: 1765, Franklin Flute
Description:
0.5 inch depth
1.25 inch C-C
0.375 inch peak
0.375 inch valley
Pattern Number: 1766, 6 inch Sine Wave
Description:
1 inch depth
6 inch C-C
Pattern Number: 1767, Chestnut Flute
Description:
0.875 inch depth
6 inch C-C
4 inch peak
1 inch valley
Pattern Number: 1771, Sawtooth
Description:
0.75 inch depth
1.50 inch C-C
1.50 inch wide triangles
Pattern Number: 1774, Bryan Flute
Description:
5 inch C-C
1-1/2 inch depth
Pattern Number: 1775, Spare Rib Flute
Description:
1 inch depth
4 inch C-C
1.25 inch peak
2.25 inch valley
Pattern Number: 1777, Textured Grave Stake
Description:
0.75 inch depth
random boards
Pattern Number: 1781, Arizona DOT Random Flute Modified
Description:
1 inch depth
1 inch to 5.5 inch peak
2 inch to 7 inch valley
Pattern Number: 1784, Pinnacle Flute
Description:
1 inch depth
1.5 inch C-C
Pattern Number: 1786, 3/4 inch Sine Wave
Description:
0.75 inch depth
2 inch C-C
Pattern Number: 1789, WTP Flute
1 Description:
.5 inch depth
4.5 inch C-C
3 inch peak
0.5 inch valley
Pattern Number: 1791, Boat Ramp Flute
Description:
0.6875 inch depth
1.45 inch C-C
0.0 inch peak
0.0 inch valley
Pattern Number: 5732, 6/2 Swell
Description:
2 inch depth sine wave
6 inch C-C
Pattern Number: 5733, Machado Flute
Description:
0.75 inch depth
5-1/2 inch C-C
4 inch peak
1 inch valley
Pattern Number: 5754 Carlsbad Flute
Description:
1.5 inch depth
4 inch pattern repeat
Pattern Number: 5939, MBTA Pyramid (Custom)
Description:
1 inch depth
All endpoints to middle of square 4"
REVEAL FORMLINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 20002
Description:
1-1/4 inch base
3/4 inch top
3/4 inch height
Pattern Number: 20003
Description:
2 inch base
1 inch top
3/4 inch height
Pattern Number: 20005
Description:
2 inch base
1 inch top
1-1/2 inch height
Pattern Number: 20008
Description:
1-1/4 inch base
1 inch top
3/4 inch height
Pattern Number: 20011
Description:
1-1/4 inch base
1 inch top
1 inch height
Pattern Number: 20014
Description:
2-1/4 inch base
1-1/2 inch top
3/4 inch height
Pattern Number: 20019
Description:
3 inch base
3 inch height
Pattern Number: 20024
Description:
3/4 inch base
3/4 inch height
Pattern Number: 20029
Description:
3 inch base
1-1/2 inch top
3/4 inch height
Pattern Number: 20078
Description:
1 inch base
0.88 inch top
1 inch height
GEOMETRIC PATTERN FORMLINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: 1806, Honeycomb
Description:
Random 0.25 inch, 0.50 inch 0.75 inch and 1 inch depths
Matching hexagon shapes
Pattern Number: 1807Cracked Earth
Description:
0.50 inch maximum depth
Pattern Number: 1808, Curtains
Description:
Random curtain like-striations with 2.25 inch to 5 inch widths
1 inch maximum depth
Requires backing
Pattern Number: 1810, Big Bubble
Description:
1 inch (25 mm) bubble height/depth
4 foot by 4 foot (1.2 m by 1.2 m) pattern repeat
Pattern Number: 1811, Circu-llusions
Description:
0.5 inch (12 mm) oval depth
4 foot by 4 foot (1.2 m by 1.2 m) pattern repeat
Pattern Number: 1812, Dou-Bulbs (In)
Description:
0.75 inch (19 mm) Feature Depth
18 inch Feature length
Pattern Number: 1813, Dou-Bulbs (Out)
Description:
0.75 inch (19 mm) Feature Depth
18 inch Feature length
Pattern Number: 1830, Gardens Chevron 1
Description:
30 inch by 30 inch repeating motif
1.5 inch maximum depth
Pattern Number: 1831, Gardens Chevron 2
Description:
36 inch by 36 inch repeating motif
1.5 inch maximum depth
** NOTE TO SPECIFIER ** Custom Patterns, and Art Panels are available in ElastoSpec. Formliner panels containing custom artwork shall extend full-height of wall up to 40 feet. No horizontal joints shall be permitted through custom artwork less than 40 feet in height. Vertical joints shall be spaced no less than 8 feet apart through custom artwork. When determining formliner panel widths, construction joint locations and formwork size shall be taken into consideration in order to minimize vertical seams. Contact Spec Formliners, Inc., for the availability and limitations of full height custom or artwork panels.
CUSTOM PATTERNS AND ARTWORK FORM LINERS FOR ARCHITECTURAL CONCRETE
Pattern Number: Custom as indicated on the Drawings
Description:
_____________________________
ACCESSORIES
SpecRelease: Petroleum-based release agent for use with our ElastoSpec, ElastoSpec Lite, and SpecVac products.
SpecSeal: High Quality one-part moisture cure silicone sealant to be used with any Spec Formliners product
Driver Bit: 3-1/2 inch Driver Bit
Formliner Screws: Coarse thread drywall screws for use with all Spec Formliners form liners
EXECUTION
EXAMINATION
Do not begin installation until substrates have been properly prepared.
Verify that field measurements, surfaces, substrates and conditions are as required, and ready to receive Work.
If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
PREPARATION
Clean surfaces thoroughly prior to installation.
Prepare substrates using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions. Refer to manufacturer's Application Guide for proper procedures for preparing formliners.
Form Liner Preparation:
Verify lines and levels of formwork and form liner patterns are within allowable tolerances.
Clean liner before each use. Do not use damaged liner when continued use or repair would diminish the aesthetics of the work.
Spray form liners with Spec Release brand form release before each use and within the same day that concrete is placed. Take care that all sections, angles of the pattern are covered with the release agent.
Do not proceed with installation until substrates have been properly prepared and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.
Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
INSTALLATION
Comply with manufacturer's installation instructions. Refer to manufacturer's Application Guide for proper procedures for installing formliners.
Install formliners within manufacturer's recommended tolerances.
For applications where concrete temperatures will exceed 140 degrees F (60 degrees C) at the formliner face, reduce the temperature with methods as recommended by manufacturer.
For applications involving multiple formliners butted together in a horizontal fashion, press the edges of the formliner together tightly to stop concrete bleeding between the formliners.
MAINTENANCE OF REUSABLE FORMLINERS
For applications with reusable formliners, comply with requirements of paragraph Delivery Storage and Handling when handling and storing units between uses. Prevent matrix build-up on the formliner surface. Excess release agent shall be removed before the form and liner is put back into service.
CLEANING AND PROTECTION
Clean exposed surfaces. Touch up, refinish, or replace damaged components in a manner acceptable to Architect.
Protect installed products until completion of project.
Touch-up, repair or replace damaged products before Substantial Completion.