What's New: Week of 06/30/2024

BMP Doors USA creates and distributes exterior or interior high-quality, DynamicRoll® High Speed Roll Up Doors in optionable colors, frame & coating options, with different dimensions available.

The DynamicRoll® Fabric Roll Up Door is an all-round high performance door with a variety of activation choices. It is our most versatile door, designed to operate in nearly all industries and applications.

This High Speed Door is self-reinserting with a flexible bottom and is safe guarded by a light curtain. A frequency-controlled motor provides smooth operation. When the door is closed, a tight, almost perfect full perimeter seal is formed around the door, increasing energy savings within your operation.

BMP Doors USA produces and distributes exterior or interior high-quality, Dynamicroll® B-Drive High Speed Doors in optionable colors, frame & coating options, with different dimensions available.

Outside door openings are very often large and exposed to high wind. The Dynamicroll® B-Drive is an innovative high-performance high-speed door, designed to operate in these harsh conditions. Thanks to the push & pull system, the door drives smoothly up and down and guarantees door closure after cycling. A tight near perfect perimeter seal is formed around the door. Anti-torsion zippers prevent the fabric from twisting after impact, allowing the door to re-insert without jamming.

Installing a Dynamicroll® B-drive High Speed Door should help resolve all of your door challenges. The fast operation of the door improves traffic flow, and the tight seal protects against bad weather conditions and increases energy savings. No stiffeners or rigid parts in the door curtain boosts safety for workers and goods. These doors are suitable for exterior openings up to 26' wide, depending on application.

BMP Doors USA offers top-notch cleanroom solutions with our cutting-edge DynamicRoll® CB 125 High Speed Doors. These cleanroom doors are customizable in colors, frames, and coatings to suit your needs.

The right rapid door for your cleanroom

The DynamicRoll® CB 125 High Speed Door is the perfect door for your cleanroom application. This high speed roll-up door is designed to separate over pressured sterile environments.

Thanks to the tightness and its special sliding system, the DynamicRoll® Clean Room Door guarantees controlled loss of pressure and allows the ventilation system and air purification to operate correctly. Airflow between rooms is limited, reducing the risk for contamination and air pressure loss.

BMP Doors USA creates and distributes the interior high-quality, DynamicRoll® CB 230 high-speed doors in optionable colors, frame & coating options, with different dimensions available.

The DynamicRoll® CB 230 is a highly reliable high-speed door intended to keeping your cleanroom clean. Its fast speed and tight full perimeter seal keep your over pressured environment sterile, allowing the ventilation and air purification systems to operate correctly.

This door operates flawless in interlock systems with multiple DynamicRoll® CB 230 High Speed Doors. No stiffeners or hard parts are used in the door panel. An escape function is standardly built in. The door seals the floor with a soft bottom edge.

The Ultimate Hygiene Door for Food Processing Excellence

Are drafts, humidity, and contamination compromising the safety and efficiency of your food processing operations? Preventing cross-contamination and bacteria is crucial in this industry. Therefore, it's essential to find a solution that meets these challenges.

Our DynamicRoll® Food PE high-speed doors uphold the highest standards of hygiene and efficiency in food processing environments. They effectively address cleanliness and functionality demands, making them the ultimate choice for your facility.

The Premier Choice for Food Hygiene Doors

The DynamicRoll® Food PE is the ultimate food processing door. Engineered for the food industry, it combines speed with self-repairing flexibility, making it an ideal food safe door. The frequenct- controlled motor and flexible bottom bar of our speed doors meet rigorous hygience standards. Making it perfect for any food production facility door application.

Made largely of polyethylene, its frame withstands harsh cleaners. Thereby, ensuring cleanliness and efficiency in food processing environments.

BMP Doors USA creates and distributes exterior or interior high-quality, DynamicRoll® Food Stainless High Speed Doors in optionable colors, frame & coating options, with different dimensions available.

The DynamicRoll® Food Stainless High Speed Door provides a stainless steel cover and door frame construction. Designed for the food industry, this high-speed door is compliant with its industry hygiene standards. The door is easy to clean. One-piece guide and motor covers and a slanted barrel hood avoid accumulation of dust, dirt and water.

Withstanding humidity, most chemicals and salty environments, the DynamicRoll® Food Stainless High Speed Door is an asset to your facility. When the door is closed a tight full perimeter seal prevents impurities from spreading. As with all BMP High Speed doors, no stiffeners or rigid parts are used in the door panel. A flexible soft bottom edge enhances door safety for all around.

BMP Doors USA creates and distributes the high-quality interior, DynamicRoll® Frigo 1 High Speed Doors in optionable colors, frame & coating options, with different dimensions available.

The main concern in cold storage is keeping temperature controlled at all times. When there is a flaw, products may perish and have to be discarded. The DynamicRoll® Frigo 1 High Speed Door, is a high performance door developed for efficiently sealing off cooled rooms in which temperatures are around freezing. The high degree of insulation optimizes temperature conservation, which is essential for connected rooms with different temperature requirements.

This DYNAMICROLL Frigo 1 High Speed Door is designed with an insulated door panel and self-reinserting . A flexible bottom edge and safety sensors assure safe door operation for people and product. When the door is closed, a tight, almost perfect full perimeter seal is formed around the door.

BMP Doors USA creates and distributes the high-quality interior, DynamicRoll® Frigo 2 Air High Speed Doors in optionable colors, frame & coating options, with different dimensions available.

With our DynamicRoll® Frigo 2 Air High Speed Door, we designed a revolutionary high-performance roll-up curtain door. Installing our intelligent air curtain door raises insulation to the next level. Blowing air in between two separate curtains creates an air insulation barrier that helps prevent ice from building up. This is ideal for separating high-traffic environments with high thermal condition differences.

After cycling, the DynamicRoll® Frigo 2 Air High Speed Door automatically returns to its closed position, forming a tight, almost perfect full perimeter seal around the door. This door is safe for people and product. No stiffeners or hard parts are used in the door panel and the floor is sealed with a flexible soft bottom edge.

The Ultimate Freezer Door for Coldstorage Environments

Are energy loss and unstable temperatures jeopardizing the integrity and efficiency of your cold storage operations? Maintaining precise temperature control is crucial in this sector. Therefore, it's vital to adopt a solution that tackles these challenges head-on.

Our DynamicRoll® Frigo 2 freezer door set the standard for efficiency and reliability in cold storage environments. They combat energy loss and temperature variability effectively. Ensuring optimal conditions are maintained effortlessly. Make the Frigo 2 your go-to choice for enhancing the operational dynamics of your cold storage facility.

The Premier Choice for Cold Storage Doors

Engineered specifically for freezer environments, the DynamicRoll® Frigo 2 cold store door combines rapid opening speeds with advanced insulation capabilities.This high-performance cold room door features a fast-acting, automatic closing mechanism. It has a double fabric design and meets strict energy efficiency and temperature control standards. It's ideal for any cold storage application.

The Frigo 2 high speed door is made from high-grade materials. It withstands low temperatures and minimizes air infiltration. This ensures optimal thermal efficiency. It also reduces energy costs in cold storage environments.

BMP Doors USA creates and distributes exterior or interior high-quality, DynamicRoll® Machine Protection Door 150 in optionable colors, frame & coating options, with different dimensions available.

These days, automation is a standard in most production areas. Machines help produce precision work, and are used in various processes. To guarantee a safe work environment, DynamicRoll® Protection Door create a protective mechanical barrier for machines and automated lines.

The DynamicRoll® Machine Protection 150 High Speed Roll Up Door is equipped with a detection micro switch in the bottom part of the side guide. A signal will confirm that the door is completely closed and machines can start. To increase safe operation, this signal works independently from the control panel.

BMP Doors USA creates and distributes exterior or interior high-quality, MegaPack® High Speed Doors that are quick folding doors for very large openings, resistant to wind.

The MegaPack® High Speed Door is a fold-up door designed to close off huge outside door openings. This door is a technological evolution in its sort. A double curtain and a sophisticated galvanized reticular structure, make this door safe, fast and able to withstand strong winds while reliably operating. A well thought design saves on valuable floor space and offers energy efficiency and low maintenance.

A MegaPack® fold-up high performance door is the perfect solution for closing off large areas in your facility, for large hangars and for environments with overhead cranes.

BMP Doors USA creates and distributes exterior or interior high-quality, Pack® High Speed Doors in optionable colors, frame & coating options, with different dimensions available.

The Pack® High Speed Door is a fold-up door that fits large openings, whether inside or outside. The galvanized steel frame is self-supporting. The curtain is made of PVC and reinforced with horizontal steel bars.

This robust door is very reliable, withstanding and operating under high wind and air pressure. Thanks to its patented guides, air leakage is low, creating a pleasant work environment. Pack doors are fitted for all kinds of industry or large hangars.

BMP Doors USA creates and distributes exterior or interior high-quality, ThermicRoll® High Speed Doors in optionable colors, frame & coating options, with different dimensions available.

High speed rigid aluminum doors are very suitable to be installed when security is an issue. BMP Doors USA's ThermicRoll® High Speed Door is a high quality aesthetically pleasing door, made of steel or aluminum. Rigid doors have a thermal-acoustic insulated door panel that can be made with or without vision. When closed, the door seals all sides of the opening creating a thermal break from the outside.

These rigid aluminum security doors are very reliable and require little maintenance. The small footprint takes up less valuable floor space. No need for ceiling anchors when mounting the door. The doors are undoubtedly a good choice for outside building applications where security is concerned, as well as interior doors where valuables or pharmaceuticals are stored.

BMP Doors USA distributes exterior or interior high-quality, automotive high speed doors in optional colors and materials.

In the industry field, automotive is one of the most fast paced around. Besides its specific production process, also the facility equipment is of the utmost importance. BMP High Speed Doors are tailored to fit this need. We make our doors to fit your requirements, offering not only high safety and perimeter sealing to enable better climate control as a priority, but also by creating a great return on investment.

BMP High Speed Doors are considered to be the safest in the market. A safety light beam built into the side guides, protects product and people in your working environment. Fast and reliable operation of the door optimizes your production work flow.

BMP Doors USA provides exterior or interior high-quality, distribution high speed doors in optional colors and materials.

In the world of logistics and distribution, speed is the keyword. Being able to handle goods in a fast and safe way is a constant focus. BMP High Speed Doors are fast, safe and reliable, and optimize traffic flow in your facility.

Whether mounted inside your warehouse or placed outside on a loading dock, efficient loading and unloading of goods is of the essence. BMP High Speed Doors operate fast and are equipped with a safety light curtain in addition to already offered safety features. The high performance roll-up doors are designed to operate whenever needed, enhancing smooth material handling.

BMP Doors USA distributes a wide range of high quality doors for internal and external use. They come in different colors and materials.

Meet the demands of cold storage areas

Cold storage environments present unique challenges, including precise temperature control, efficient access, and safety concerns. Traditional doors often fall short, leading to temperature inconsistencies, energy wastage, and safety hazards. In these critical environments, finding a solution that offers durability, efficiency, and safety is crucial for preserving perishable goods effectively.

That’s why BMP High Speed Doors offers a range of superior cold storage and freezer doors designed to exceed your expectations. We engineer our high speed roll up doors with precision to meet the rigorous demands of cold storage environments. Ensuring optimal temperature control, energy efficiency, and safety for your personnel and equipment.

BMP Doors USA distributes exterior or interior high-quality, heavy industries, Aerospace, and shipyard high speed doors in optional colors and materials.

Robust industries require robust solutions. When it comes to doors sealing large openings, performance and reliability are essential. BMP Doors USA creates doors that are built to operate in harsh conditions, withstanding forceful winds and pressure differences.
Heavy-duty materials and advanced technology make this door a perfect fit for your facility. To ensure safe operation of the door, all doors come standard with a full-height light beam.

BMP Doors USA distributes exterior or interior high-quality, industrial & manufacturing high speed doors in optional colors and materials.

A manufacturing plant is a busy environment where all kind of activities interact fast and continuously. Any hindrance in traffic flow can lead to a huge setback of productivity. Installing a reliable BMP High Speed Door alleviates your door worries, limiting this downtime and eliminating costly repairs to a damaged door.

BMP Doors USA build high-performance, high speed doors with high-quality materials. They are fast, self-reinserting after an accidental impact and safe for workers and goods. A full perimeter seal protects your facility against weather extremes and helps save on energy cost.

BMP’s DynamicRoll® and DynamicRoll® B-Drive high-speed doors represent cutting-edge industrial solutions designed for swift operation in a variety of commercial and industrial settings. These doors are acclaimed for their durability, speed, and efficient performance.

BMP Doors USA distributes exterior or interior high-quality, pharmaceutical and cleanroom high speed doors in optional colors and materials.

Hygiene, cleanliness and Class 5 sealing.

Pharmaceutical plants are high technological places where hygiene and cleanliness are taken to the highest level. At a time where compliance and safety regulations constantly intensify, BMP Doors USA cleanroom doors are engineered to fulfill this important task.

A fast cycle combined with a tight full perimeter seal up to Class 5 prevents air from seeping in, keeping impurities out of your conditioned environment. With a sleek and easy to clean design, the DynamicRoll® High Speed Doors checks off your cleanroom door needs. Installed in airlocks, air pressure differences, air quality and temperature can better be controlled, creating a safe working environment.

BMP Doors USA distributes exterior or interior high-quality, retail high speed doors in optional colors and materials.

Making your store a comfortable environment for customers contributes to their shopping experience. Installing a BMP High Speed Door helps you achieve this goal. Fast opening and closing combined with a perimeter seal around the door assures better climate control, limiting dust whirling and bad air flow between the different areas of the building.

BMP DynamicRoll® High Speed Doors are designed for interior use. The doors have a safe bottom and are built without rigid parts in the curtain. To create an escape route in case of emergency, an emergency exit curtain is available. Professional printing of your logo, product pictures or message on the door is an absolute possibility.

BMP Doors USA distributes exterior or interior high-quality, transportation and municipalities high speed doors in optional colors and materials.

Weather conditions are unpredictable but they certainly have an influence on your production environment. Creating a comfortable and safe working area increases overall productivity and work ethic. Installing a door from BMP Doors USA helps turning your inside climate into a controlled space. BMP High Speed Doors operate under strong winds and icy air but also shelter workers from sweltering, humid weather. Choosing BMP’s Thermicroll® High Speed Door combines high-level security with high-performance qualities.

Ventev's heavy-duty outdoor rated fleet-top mount magnet eliminates need for a permanent mount. Made with industrial-grade Ferrite and powder-coated mount plates provide excellent weatherability along with UV and rust resistance. It offers a 40 Lbf/leg of side-pull strength and 35 Lbf/leg of lift-off. The included antenna mount plate allows quick antenna mounting through hole. Can be easily removable without damaging the surface.

Ventev's 12 dBi fiberglass omnidirectional antenna is designed for indoor and outdoor 2.4 GHz wireless local area networks. It features UV stable, vented radome that provides ultimate sustainability against extreme weather conditions such as high temperature, strong winds, and rain. Includes a sturdy side mount for convenient mast or wall mounting.

Terrawave by Ventev's mid-gain 2.4 GHz 13 dBi directional antenna is perfect for a variety of wireless applications. This wide beamwidth antenna is single linear polarization and can be mounted in either a vertical or horizontal configuration. It consists of a low-cost, high-performance circuit design enclosed in a UV-stabilized ABS plastic radome with an aluminum backplane for superior durability. Includes a pole mounting kit and Universal Articulating Pole Mount (TW-ART-MOUNT).

Ventev's 2.4 GHz yagi antenna is a rugged, high-performance directional antenna to be used as a bridge antenna between two networks or for point-to-point communications. The antenna provides 15 dBi of gain and a very symmetrical pattern characteristic. It may be installed in either vertical or horizontal polarization. Includes an RPTNC male connector with a 36" pigtail and a mast mount.

Ventev's white surface mount omnidirectional antenna covers the 2.4-2.5 GHz frequency range. This antenna provides a weatherized, secure, and low-profile design that can be used in a wide variety of applications. A 15" integral cable pigtail with an RPTNC male connector is included.

Ventev's high-quality 2.4 GHz rubber duck antennas offer wide coverage at an outstanding value. These affordable antennas are rugged and flexible, making them suitable for a wide variety of applications. Each antenna features a flexible articulating mount.

TerraWave by Ventev's 3 dBi fiberglass omnidirectional antenna is specifically engineered for indoor and outdoor 2.4 GHz wireless local area networks. The antenna is currently deployed in numerous machine-to-machine and SCADA networks where it relays equipment status and commands between network and control nodes. The antenna features a UV-stabilized radome that provides superior protection against extreme weather conditions such as high temperatures, strong winds, and rain. Includes a sturdy side mount for convenient mast or wall mounting.

Ventev's high-quality 2.4 GHz super duck antenna offers wide coverage at an outstanding value. This affordable antenna is rugged and flexible, making it suitable for a wide variety of applications. Each antenna features a gain of 5 dBi and a flexible articulating mount.

Terrawave by Ventev's 6 dBi fiberglass omnidirectional antenna is designed for indoor and outdoor 2.4 GHz wireless local area networks. It features a UV stable, vented radome that provides ultimate sustainability against extreme weather conditions such as high temperature, strong winds and rain. It can be mast, ceiling or wall mounted. Includes a durable mounting bracket.

Terrawave by Ventev's 2.4/5 GHz directional panel Wi-Fi antenna is a rugged, high-performance antenna featuring three integrated 2.4 GHz and 5 GHz dual-band antennas in one radome, making it an ideal and aesthetically pleasing antenna to support outdoor applications in next generation wireless communication systems. This antenna is also DC Grounded. Includes RPSMA Male connectors with a 36" pigtail. The antenna comes with the Ventev Universal Articulating Mount (TW-ART-MOUNT) as well as an L-bracket for multiple mounting options.

Ventev's 2.4/5 GHz 12/13dBi high-density multiple-input and multiple-output (MIMO) dual-polarized directional Wi-Fi antenna is designed to operate with Wi-Fi 5 (802.11ac Wave I & II) & Wi-Fi 6 (802.11ax) access points. The narrow beam widths of this dual-polarized antenna are ideal for high-density environments including large public venues (LPVs).

Terrawave by Ventev's 2.4/5 GHz 12/13 dBi High Density Multiple-Input and Multiple-Output (MIMO) Dual-Polarized Directional Wi-Fi Antenna is designed to operate with Wi-Fi 5 (802.11ac Wave I & II) & Wi-Fi 6 (802.11ax) access points. The narrow beamwidths of this dual-polarized antenna are ideal for high density environments including large public venues (LPVs).

Ventev's 2.4/5 GHz 13 dBi Wi-Fi Warehouse Directional Antenna can connect to any manufacturer's 802.11ac Wave I, II, or Wi-Fi 6 access points (APs) with six (6) ports. The antenna provides a high gain with narrow vertical and wide horizontal beam widths which allow concise coverage for aisles and make it ideal for warehouse deployments. The antenna ships with the Ventev 10" Strong Arm Mount (SAM).

TerraWave by Ventev's 2.4/5 GHz 13 dBi Wi-Fi Directional Antenna can connect to any manufacturer's 802.11ac Wave I, II or Wi-Fi 6 access points (APs) with four (4) ports. The antenna provides a high gain with narrow vertical and wide horizontal beamwidths which allows concise coverage for aisles and makes it ideal for warehouse deployments. The antenna ships with the Ventev 10" Strong Arm Mount (SAM). Optional Ventev mounts that are compatible with this antenna include: Industrial Articulating, Universal Articulating and High Strength Universal.

Ventev's high-density 2.4/5 GHz 13 dBi patch antenna. This antenna is designed for wireless networks operating in the 2.4 GHz and 5 GHz frequency range in both indoor and outdoor applications. The antenna uses a narrow 35 deg. beamwidth at 2.4/5 GHz, minimizing channel-to-channel interference which in turn leads to increased capacity. Specifications include vertical polarization, 50 Ohm, ≤ 2.0 VSWR along with 50 W maximum input power.

Terrawave by Ventev's high-density 2.4/5 GHz 13 dBi Patch Antenna is designed for wireless networks operating in the 2.4 GHz and 5 GHz frequency range in both indoor and outdoor applications. The antenna uses narrow 35° and 30° beamwidths at 2.4 and 5 GHz respectively, minimizing channel-to-channel interference which in turn leads to increased capacity.

Ventev's high-density 2.4/5 GHz 14 dBi patch Wi-Fi antenna. This antenna is designed for wireless networks operating in the 2.4 GHz and 5 GHz frequency range in both indoor and outdoor Wi-Fi applications. The antenna uses a narrow 35 deg. beamwidth at 2.4/5 GHz, minimizing channel-to-channel interference which in turn leads to increased capacity. This antenna also features higher gain which enables a greater distance between the antenna and the users without sacrificing network performance. Specifications include vertical polarization, 50 Ohm, ≤ 2 VSWR along with 50 W maximum input power. The antenna supports demanding indoor and outdoor applications in next generation wireless communication systems. RoHS compliant. Dimensions: 14.96 x 14.96 x 1.3 in

Terrawave by Ventev's 4" compact omnidirectional Wi-Fi antenna offers the ease and flexibility of having only one antenna for any type of access point. It features 2 dBi gain (2.4/5 GHz frequencies) and its rugged design makes it suitable for a wide variety of applications.

TerraWave by Ventev's 2.4/5 GHz 2.5/4 dBi Omnidirectional Micro Wi-Fi Antenna with 2 RPSMA Male connectors are designed to be operated with any manufacturer's 2 and 4 lead access points. This small, visually appealing surface mount antenna is an ideal solution for low-profile and/or aesthetic deployments. It can also be used in vehicles for communications, location tracking, and fleet management. An L-bracket with U-Bolts (SKU 509824) is included with the antenna for wall or mast mounting.

TerraWave by Ventev's 2.4/5 GHz 2.5/4 dBi outdoor Small Form Factor omnidirectional Wi-Fi antenna with long threaded bushing is designed to operate with Cisco's latest WLAN access points. The antenna's small size and clean appearance, combined with excellent performance, make it ideal for deployments ranging from large office spaces to warehouse or manufacturing environments where space is limited or visual appeal is important. The 4 dual-band leads deliver exceptional performance while simplifying connection to the access point. The long threaded bushing enables mounting on thicker surfaces. An L-bracket with mounting hardware is included to support mast and/or wall mounting.

Terrawave by Ventev's 2.4/5 GHz 2.5/4 dBi outdoor Small Form Factor omnidirectional Wi-Fi antenna with long threaded bushing is designed to operate with Cisco's latest WLAN access points. The antenna's small size and clean appearance, combined with excellent performance, make it ideal for deployments ranging from large office spaces to warehouse or manufacturing environments where space is limited or visual appeal is important. The 4 dual-band leads deliver exceptional performance while simplifying connection to the access point. The long threaded bushing enables mounting on thicker surfaces. An L-bracket with mounting hardware is included to support mast and/or wall mounting.

Terrawave by Ventev's Dual Band Micro Omni Wi-Fi Antenna is optimized for aesthetic and mobile Wi-Fi applications. This aesthetically pleasing antenna is an ideal partner for four connector dual-band Wi-Fi access points where aesthetics is a major deployment consideration. This multi-use antenna can also be used in vehicles for communications, location tracking, and fleet management.

Ventev's Dual Band Micro Omni Antenna is optimized for aesthetic and mobile Wi-Fi applications. The antenna is an ideal partner for four connector dual-band Wi-Fi access points where aesthetics are a major deployment consideration. This multi-use antenna can also be used in vehicles for communications, location tracking, and fleet management.

TerraWave by Ventev's 2.4/5 GHz ceiling mount multiple-input and multiple-output (MIMO) omnidirectional antenna is designed to be operated with any manufacturer's enterprise-class 802.11n MIMO access points (APs). The antenna features six integrated 2.4 and 5 GHz dual-band Omni antennas in one enclosure, making it an ideal and aesthetically-pleasing antenna to support demanding applications in next-generation IEEE 802.11n indoor wireless communication systems.

Ventev's 2.4/5 GHz 2/2.5 dBi omnidirectional antenna is designed to operate with any demanding wireless communication system.  The slim form factor of the antenna blends seamlessly into locations where maintaining environmental aesthetics are critical. It features four dual-band 36" cables with right-angle RPSMA male connectors.  This solution allows engineers to simplify deployments by using only one antenna for dual-band access points.

TerraWave by Ventev's 2.4/5 GHz 2/2.5 dBi Mini Ceiling mount omnidirectional Wi-Fi antenna is designed to be operated with Cisco's latest 802.11ac Waves I & II WLAN access points. The antenna's appealing design and small size maintain building decor while providing outstanding Wi-Fi connectivity. The 4 dual-band leads with right-angle connectors deliver exceptional performance while simplifying connection to the access point. Features a threaded plastic bushing and nut for simple ceiling tile mounting.

Terrawave by Ventev's compact dual-band omnidirectional antenna offers wide coverage giving the user the ease and flexibility of having only one antenna for any type of access point. It features 2/3 dBi gain (2.4/5 GHz frequencies) and its rugged design makes it suitable for a wide variety of applications.

Terrawave by Ventev's compact omnidirectional Wi-Fi antenna the ease and flexibility of having only one antenna for any type of access point. It features 2/3 dBi gain (2.4/5 GHz frequencies) and its rugged design makes it suitable for a wide variety of applications.

Terrawave by Ventev's 2.4/4.9-5.825 GHz non-articulating omni antenna is designed to operate with many manufacturers' enterprise-class access points (APs). This antenna features a short, sleek design, making it an ideal and aesthetically pleasing antenna to support demanding applications in next generation wireless communication systems for indoor applications.

Terrawave by Ventev's compact omnidirectional antenna offers the ease and flexibility of having one antenna for any type of access point. It features 2/3 dBi gain (2.4/5 GHz frequencies) and its rugged design makes it suitable for a wide variety of applications. TAA Compliant.

Terrawave by Ventev's 2.4/5 GHz non-articulating omni Wi-Fi antenna is designed to operate with many manufacturers' enterprise-class access points (APs). This antenna features a short, sleek design, making it an ideal and aesthetically pleasing antenna to support demanding applications in next generation indoor wireless communication systems.

Terrawave by Ventev's compact omnidirectional antenna offers the ease and flexibility of having only one antenna for any type of access point. It features 2/3 dBi gain (2.4/5 GHz frequencies) and its rugged design makes it suitable for a wide variety of applications. TAA Compliant.

Ventev's 2/3 dBi Omnidirectional Antenna with 8 Port DART connector is designed to operate with Cisco's Catalyst 9130AXE AP. The antenna is a polarization-diverse omnidirectional designed for use in indoor environments and can be mounted on suspended ceiling tiles.

TerraWave by Ventev's 2.4/5 GHz 2/3.5 dBi Bantam Antenna is designed to operate with any Wi-Fi network. The small, compact size and lightweight structure make it easy to install and blend into any environment.

Terrawave by Ventev's 2.4/5 GHz 2/3.5 dBi Bantam Antenna is designed to operate with any Wi-Fi network.  The small, compact size and lightweight structure make it easy to install, and blends into any environment.

Ventev's flexible, adaptable Guardrail Antenna is the result of Ventev's considerable experience meeting stadium Wi-Fi deployment challenges. The antenna's unique design is weather-proof, adapts to different railing sizes, railing configurations, and cable connection choices to help venue owners comply with local safety codes and the Americans with Disabilities Act.

Ventev's compact omnidirectional Wi-Fi antenna offers the ease and flexibility of having only one antenna for any type of access point. It features 3.5/6 dBi gain (2.4/5 GHz frequencies) and its rugged design makes it suitable for a wide variety of applications.

Terrawave by Ventev's 2.4/5 GHz 3/4 dBi ceiling mount omnidirectional Wi-Fi antenna is designed to operate with any manufacturer's three and six-lead WLAN access points. The antenna's appealing design maintains building decor while providing outstanding Wi-Fi connectivity. The 3 dual-band leads deliver exceptional performance while simplifying connection to the access point. The antenna features a threaded plastic bushing and nut for simple ceiling tile mounting.

Ventev's 2.4/5 GHz 3/4 dBi ceiling mount omnidirectional antenna is designed to operate with any indoor wireless communication system. With dual-band leads, each 36" cable supports both 2.4 and 5 GHz, making it an ideal and aesthetically-pleasing antenna to support demanding indoor applications.

Terrawave by Ventev's patented Raised Access Floor Wi-Fi Antenna embeds Ventev's proprietary antenna technology into Haworth® TecCrete® Access Flooring 1500 panels. The Access Floor Antenna is typically deployed in raised-floor environments, such as offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

Terrawave by Ventev's patented Raised Access Floor Wi-Fi Antenna embeds Ventev's proprietary antenna technology into Haworth® TecCrete® Access Flooring 1250 panels. The Access Floor Antenna is typically deployed in raised-floor environments, such as offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

Terrawave by Ventev's 2.4/5 GHz 4 dBi Quad Patch Antenna provides narrow beamwidth with low gain. This antenna is an ideal solution for lower ceilings and multi-level locations that need to limit RF interference and reduce beam “bounce". Deployment is further simplified by the multiple mounting options: the antenna ships with Ventev's Universal Articulating Mount (SKU 384807), and the back panel hole patterns are also compatible with Ventev's Cisco Co-Locating Mount (SKU 568600) (sold separately).

Terrawave by Ventev's 2.4/5GHz 4.5/5.5 dBi Dual Polarized Directional Wi-Fi Antenna is designed to operate with Aruba's latest 802.11ac Waves I & II WLAN access points. The antenna's gain and beamwidths make the antenna ideal for sector coverage. Dual-Polarization enables the antenna to provide excellent transmit and receive performance in high scatter environments. 4 dual-band leads deliver exceptional performance while simplifying connection to the access point. A 10" Strong Arm Articulating Mount enables the antenna to point precisely where coverage is most needed, and comes with mounting hardware to support mast and/or wall mounting.

Ventev's 2.4/5 GHz Multiple-Input and Multiple-Output (MIMO) Omnidirectional Antenna is designed to be operated with any manufacturer's enterprise-class MI(MO access points (APs). The  antenna features four integrated 2.4 and 5 GHz dual-band omni antennas in one radome, making it an ideal and aesthetically-pleasing antenna to support demanding applications in next generation wireless communication systems.

Terrawave by Ventev's 2.4/5 GHz 6 dBi 4" outdoor Small Form Factor omnidirectional Wi-Fi antenna is designed to operate with any manufacturer's 4-lead WLAN access points. The antenna's small size and clean appearance, combined with excellent performance, make it ideal for deployments ranging from large office spaces to warehouse or manufacturing environments where space is limited or visual appeal is important. The 4 dual-band leads support radio chains (2.4 or 5 GHz) and enable spatial multiplexing. An L-bracket with mounting hardware is included to support mast and/or wall mounting.

Ventev's 2.4/5 GHz 4/6 dBi antenna is designed to work with 4-Lead MIMO radios functioning in the 802.11n wireless protocol band. It features four dual-band antennas in a single unit, and each pigtail is 2.4 or 5 GHz. This solution allows engineers to simplify deployments by using only one antenna for dual-band access points.

Ventev's 2.4/5 GHz 4/6 dBi Wi-Fi omnidirectional antenna is designed to work with four (4) lead MIMO radios functioning in the 802.11n wireless protocol band. It features 4 dual-band antennas in a single unit. This solution allows engineers to simplify deployments by using only one antenna for dual-band access points (APs). Specifications include vertical polarization, 50 Ohm, ≤ 2.0/≤ 2.5 VSWR along with 2 W maximum power. RoHS compliant. Dimensions: 5.4 x 2.9 x 1 in

Ventev's 4/6 dBi Omnidirectional Antenna with 8 RPSMA Male connectors is designed to operate with WiFi 6 APs. The antenna is a polarization-diverse omnidirectional designed for use in indoor environments and can be mounted on suspended ceiling tiles.

Ventev's 2.4/5 GHz 4/6 dBi small form factor ceiling mount multiple-input and multiple-output (MIMO) omnidirectional Wi-Fi antenna is designed to be operated with any manufacturer's latest 802.11ac Waves II WLAN access points. The antenna's appealing design maintains building decor while providing outstanding Wi-Fi connectivity. The 4 dual-band leads with right-angle connectors deliver exceptional performance while simplifying connection to the access point. Features a threaded plastic bushing and nut for simple ceiling tile mounting.

Ventev's 2.4/5 GHz 4/6 dBi Wi-Fi omnidirectional antenna is designed to operate with 802.11ac Wave I & II access points (APs) and the latest Wi-Fi 6 APs. The antenna's appealing design maintains building decor while providing outstanding Wi-Fi connectivity. The 4 dual-band leads with RPSMA male connectors deliver exceptional performance while simplifying connection to the access point. The antenna features a threaded plastic bushing and nut for simple ceiling tile mounting.

Ventev's 2.4/5 GHz 4/6 dBi mini quad ceiling Wi-Fi antenna. This antenna features four (4) dual-band antennas in a single unit. This solution allows engineers to simplify Wi-Fi deployments by using only one antenna for dual-band access points (APs). Specifications include vertical polarization, 50 Ohm, ≤ 2.0 / ≤ 2.5 VSWR along with 2 W maximum input power.

TerraWave by Ventev's  2.4/5 GHz 4/6 dBi antenna is designed to work with 4-Lead MIMO radios functioning in the 802.11n wireless protocol band.  It features four dual-band antennas in a single unit, where each pigtail is 2.4 or 5 GHz.  This solution allows engineers to simplify deployments by using only one antenna for dual-band access points.

Terrawave by Ventev's Dual Band Fiberglass Antenna is designed to operate with any manufacturer's access point that utilizes N Male connectors. This antenna operates in the 2.4 and 5.0 GHz frequency with a gain of 4 and 7 dBi. The antenna includes a direct N Male connector and is designed to support demanding wireless applications.

TerraWave by Ventev's Wi-Fi Omni fiberglass antenna is designed to operate with any manufacturer's access point that utilizes N Male connectors. This antenna operates in the 2.4 and 5 GHz frequencies with a gain of 4 and 7 dBi respectively. The antenna includes a direct N Male connector and is designed to support demanding wireless applications.

Terrawave by Ventev's compact dual-band omnidirectional antenna offers a wide coverage area for improved connectivity giving the user the ease and flexibility of having only one antenna for any type of outdoor access point (AP). It features 4/7 dBi gain at 2.4 & 5 GHz, respectively and its rugged design makes it suitable for a wide variety of applications. This 4/7 dBi omni is sold in sets of two (2).

Terrawave by Ventev's 2.4/5 GHz fiberglass omnidirectional Wi-Fi antenna offers extended wireless coverage for outdoor applications working in the 2.4/5 GHz frequencies. This antenna features dual-band functionality to support both 2.4 GHz and 5 GHz, making it an ideal antenna to support demanding outdoor applications. It comes with a rugged, durable exterior and a heavy-duty mast/pole mount.

Terrawave by Ventev's 2.4/5 GHz 4-Port Wall Junction Box Wi-Fi Antenna is concealed within a standard three-gang electrical box. The antenna's cover plate looks like a standard junction box cover, providing building managers, IT network operators, and building architects with an aesthetically appealing Wi-Fi antenna that will blend into existing room decor for “out of sight" coverage and capacity. The antenna is designed to be installed within a dry wall cut-out where the 6' leads can connect to a nearby access point. The directional antenna provides 0– 45 degree down tilt for excellent coverage and capacity in one or more rooms.

Ventev's 2.4/5 GHz 4-Port wall junction box Wi-Fi antenna is concealed within a standard three-gang electrical box. The antenna's cover plate looks like a standard junction box cover, providing building managers, IT network operators, and building architects with an aesthetically appealing Wi-Fi antenna that will blend into existing room decor for “out of sight" coverage and capacity. The directional antenna provides 0 - 45 deg. down tilt for excellent coverage and capacity in one or more rooms, and is designed to be installed within a drywall cut-out where the 6 ft leads can connect to a nearby access point.

Terrawave by Ventev's 2.4/5 GHz 5/6 dBi Directional Wi-Fi Junction Box Antenna with 6 RPSMA male is concealed within a standard four-gang electrical box, and is designed to operate with any manufacturer's 6-lead access points. The antenna's cover plate looks like a standard junction box cover, providing building managers, IT network operators, and building architects with an aesthetically appealing Wi-Fi antenna that will blend into existing room decor for “out of sight" coverage and capacity. The antenna is designed to be installed within a dry wall cut-out or drop ceiling tile where the 6' leads can connect to a nearby access point. The directional antenna provides 0– 45 degree articulation for excellent coverage and capacity in one or more rooms.

Engineered for use in prisons, this unique product is a 13.7" x 10.5" x 7.4" polycarbonate enclosure that protects the access point (not included) and an articulating 2.4/5 GHz 5/6 dBi Wi-Fi Directional Antenna. The rugged, RF-transparent enclosure is IP-67-rated for protection against dust, water intrusion and strikes. T25 tamper proof screws seal the enclosures lid and protect the antenna and access point from vandalism. The integrated solution is ideal for harsh indoor or outdoor environments.

Terrawave by Ventev's 2.4/5 GHz 6 dBi 4" outdoor Small Form Factor omnidirectional Wi-Fi antenna is designed to operate with any manufacturer's 4-lead WLAN access points. The antenna's small size and clean appearance, combined with excellent performance, make it ideal for deployments ranging from large office spaces to warehouse or manufacturing environments where space is limited or visual appeal is important. An L-bracket with mounting hardware is included to support mast and/or wall mounting.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Quad Patch Multiple-Input and Multiple-Output (MIMO) antenna is designed to be operated with any manufacturer's enterprise-class 802.11n MIMO access points.  The antenna comes with four RPTNC Male connectors and 36" cables. With dual-band leads, each cable supports both 2.4 and 5 GHz, making it an ideal antenna to support demanding outdoor applications in next generation IEEE 802.11n wireless communication systems. The antenna radome can withstand exposure to moisture and dust and comes with an articulating mount.

Ventev's 802.11n/ac/ax antenna is designed to operate with any manufacturer's enterprise-class 802.11n, 802.11ac and 802.11ax access points (APs). This 2.4/5 GHz 6 dBi directional antenna features six dual-band antennas in a single unit, where each pigtail is 2.4 and 5 GHz. This solution allows engineers to simplify deployments by using only one antenna for dual band access points. The antenna includes a 10" Strong Arm Mount (SAM).

Terrawave by Ventev's 6 dBi Directional Antenna is designed to operate with any manufacturer's enterprise-class access points (APs). This 2.4/5 GHz 6 dBi directional antenna features four dual-band antennas in a single unit, where each pigtail is 2.4 and 5 GHz. This solution allows engineers to simplify deployments by using only one antenna for dual band access points.

Terrawave by Ventev's 6 dBi Directional antenna with 4 Port DART connector is designed to operate with Cisco 802.11AX APs. This 2.4/5 GHz directional antenna features four dual-band antennas in a single unit, where each port is 2.4 and 5 GHz. The antenna is a functional equivalent of Cisco's 2566P4W antenna, with the gain and beamwidths required to deliver on user demand for high capacity connectivity.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Wi-Fi High Density Multiple-Input and Multiple-Output (MIMO) Directional Antenna is designed to operate with Cisco's 802.11AX access points. The antenna is a functional equivalent of Cisco's 2566D4M antenna, with the gain and narrow beamwidths required to deliver on user demand for high capacity connectivity. Dual polarization makes it ideal for high scatter environments.  Four dual-band leads deliver exceptional performance while simplifying connection to the access point. The antenna ships with a 10" articulating Strong Arm Mount and mounting hardware to support mast and/or wall mounting.

Terrawave by Ventev's 2.4/5 GHz 6 dBi High Density Directional Wi-Fi Antenna is designed to operate with any manufacturer's latest 802.11 ac Waves I & II WLAN access points. The antenna's gain and directional beam delivers on the modern user demand for high capacity connectivity. Four dual-band leads ensure exceptional performance while simplifying connection to the access point. An articulating mount enables the antenna to be positioned precisely where coverage is needed, and comes with mounting hardware to support mast and/or wall mounting.

Ventev's 2.4/5 GHz 6 dBi High Density directional Wi-Fi antenna is designed to operate with Cisco's latest access points. The antenna's gain and directional beam delivers on the modern user demand for high capacity connectivity. 4 dual-band leads deliver exceptional performance while simplifying connection to the access point. An articulating mount enables the antenna to be pointed precisely where coverage is most needed, and comes with mounting hardware to support mast and/or wall mounting.

Ventev's 2.4/5 GHz 6 dBi high-density dual polarized directional Wi-Fi antenna is designed to operate with a variety of access points (APs). This antenna has the gain and narrow beamwidths required to deliver on user demand for high-capacity connectivity. Dual polarization makes it ideal for high scatter environments. Four dual-band leads deliver exceptional performance while simplifying connection to the access point. The antenna ships with a 10 in articulating Strong Arm Mount and mounting hardware to support mast and/or wall mounting.

Ventev's 2.4/5 GHz 6 dBi High-Density directional Wi-Fi antenna is designed to operate with Cisco's latest access points. The antenna's gain and directional beam delivers the modern user demand for high-capacity connectivity. 4 dual-band leads deliver exceptional performance while simplifying connection to the access point. An articulating mount enables the antenna to be pointed precisely where coverage is most needed and comes with mounting hardware to support mast and/or wall mounting.

This 2.4/5 GHz 6 dBi Wi-Fi directional antenna features six dual-band antennas in a single unit, where each pigtail is 2.4 and 5 GHz. This solution allows engineers to simplify deployments by using only one antenna for dual-band access points. Ventev's 802.11ac/ax antennas are designed to operate with any manufacturer's enterprise-class APs.

Ventev's 2.4/5 GHz 6 dBi High-Density Multiple-Input and Multiple-Output (MIMO) Dual-Polarized Directional Wi-Fi Antenna is designed to operate with Cisco's latest Wi-Fi 6 (802.11AX) access points. The narrow beamwidths of this dual-polarized antenna are ideal for high-density environments including large public venues (LPVs).

Terrawave by Ventev's 2.4/5 GHz 6 dBi High Density Dual-Polarized Directional Wi-Fi Antenna is designed to operate with Wi-Fi 6 (802.11ax) access points. The narrow beamwidths of this dual-polarized antenna are ideal for high density environments including large public venues (LPVs).

Ventev's 2.4/5 GHz 6 dBi high-density MIMO dual polarized directional Wi-Fi antenna. This antenna is designed to operate with Wi-Fi 6 (802.11ax) access points (APs). Specifications include vertical polarization, 50 Ohm, < 2/< 2 VSWR along with 50 W maximum input power. The narrow beamwidths of this dual polarized antenna are ideal for high density environments including Large Public Venues (LPVs). RoHS compliant. Dimensions: 11.5 x 11.5 in

Terrawave by Ventev's 802.11n/ac/ax antenna is designed to operate with any manufacturer's enterprise-class 802.11n, 802.11ac and 802.11ax access points (APs). This 2.4/5 GHz 6 dBi directional antenna features eight dual-band antennas in a single unit, where each pigtail is 2.4 and 5 GHz. This solution allows engineers to simplify deployments by using only one antenna for dual band access points. The antenna includes a 10" Strong Arm Mount (SAM).

Terrawave by Ventev's patented Handrail Wi-Fi Antenna is designed to fit on the handrail of stadiums, arenas and other Large Public Venues (LPVs). The Handrail Antenna addresses large public venues' need to provide an “always connected" Wi-Fi experience. The antenna's unique design is the result of Ventev's considerable experience meeting stadium Wi-Fi deployment challenges. It is weather-proof, fits any railing size and configuration and complies with safety codes and the Americans with Disabilities Act.

TerraWave by Ventev's High-Density Quad Patch Wi-Fi Antenna provides narrow beamwidth with low gain. This 2.4/5 GHz 6 dBi directional antenna features four dual-band antennas in a single unit. Each antenna pigtail is dual-band with RPTNC Males. The antenna ships with Ventev's Universal Articulating Mount, SKU 384807, and the back panel hole patterns are also compatible with Ventev's Co-Locating Mount, SKU 568600. (Both are sold separately).

Fits Low Profile I-Beam Mount for Wireless Access Points

Ventev's 2.4/5 GHz 6 dBi directional antenna is designed to operate with 802.11 n, ac & ax (WiFi 6) access points. The antenna features four dual-band antennas in a single unit which allows engineers to simplify deployments by using only one antenna for dual-band access points and is engineered to mount on any flat surface.

TerraWave by Ventev's 2.4/5 GHz 6 dBi directional antenna is designed to operate with 802.11 n, ac & ax ( Wi-Fi 6) access points. The antenna features four dual-band antennas in a single unit which allows engineers to simplify deployments by using only one antenna for dual-band access points. Designed to mount on any flat surface.

Terrawave by Ventev's Small Form Factor Micro Patch Antenna with Medium Strength Articulating Mount offers outstanding Wi-Fi performance in a small package with a rugged mounting solution. The antenna and mount combination are designed for use indoors or outdoors. The mount articulates horizontally and vertically for a variety of mounting positions and can be installed on poles or walls.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Small Form Factor Micro Patch Antenna delivers outstanding Wi-Fi performance in a very small package and is ideal for space constrained environments or environments that place a premium on aesthetics. The versatile micro patch antenna is for use indoors or outdoors, and is primarily designed for use with any manufacturer's access points. It can be mounted on walls or ceiling tiles, and on poles and masts using the Ventev Medium Strength Universal Mount (SKU 506048 – sold separately). The antenna is IP54 compliant to ensure outstanding outdoor performance under harsh environmental conditions.

TeraWave by Ventev's Small Form Factor Patch Wi-Fi Antenna with Medium Strength Articulating Mount offers outstanding Wi-Fi performance in a small package with a rugged mounting solution. The antenna and mount combination are designed for use indoors or outdoors. The mount articulates horizontally and vertically for a variety of mounting positions and can be installed on poles or walls. This antenna and mount combination ships both products in a single box.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Micro Patch Wi-Fi Antenna delivers outstanding Wi-Fi performance in a very small package that is ideal for space constrained environments or environments that place a premium on aesthetics. The versatile micro antenna is designed for indoor use with Cisco access points. However, the antenna is IP54 compliant and, when paired with the Medium Strength Universal Mount (SKU 506048 – sold separately), can be mounted outside on poles or walls. Ventev's Small Form Factor Micro Patch Antenna ships with the antenna and two screws for ceiling tile mounting. The antenna can be ceiling mounted with the two screws.

Ventev's 6 dBi 6-Lead Micro Patch Antenna with Medium Strength Articulating Mount offers outstanding Wi-Fi performance in a small package with a rugged mounting solution. The antenna and mount combination are designed for indoor or outdoor deployments and are compatible with current RPSMA-connected access points (APs). The mount articulates horizontally and vertically for various mounting positions and can be installed on poles or walls.

TerraWave by Ventev's 6 dBi Small Form Factor Nano Patch Antenna delivers outstanding Wi-Fi performance in a very small package and is ideal for space-constrained environments or environments that place a premium on aesthetics. The versatile Nano Patch Antenna is for use indoors and can be mounted on walls or ceiling tiles.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Omnidirectional Wi-Fi Antenna for LED Light Globes transforms outdoor light globes into Wi-Fi hot spots. The antenna is designed to operate with the most modern access points with RPSMA connectors. This unique antenna installs inside outdoor lighting globes to ensure concealed, high-performance Wi-Fi. The antenna delivers as a kit with Printed Circuit Board antenna elements, stand-off spacers, and associated attachment hardware.

TerraWave by Ventev's 6 dBi outdoor multiple-input and multiple-output (MIMO) omnidirectional antenna is designed to operate enterprise-class 802.11n MIMO access points.   Each cable supports 2.4 and 5 GHz with dual-band leads, making it an ideal and aesthetically pleasing antenna to keep demanding outdoor applications in next-generation IEEE 802.11n wireless communication systems. The rugged enclosure makes the antenna ideal for a warehouse or manufacturing environment. Includes an L-Bracket for mast and or wall mounting. Industrial beam clamps are available as an additional option.

TerraWave Ventev's 2.4/5 GHz Outdoor Omni Antenna is designed to operate with many manufacturers' enterprise-class access points (APs). This antenna features three dual-band leads that operate in the 2.4 GHz and 5 GHz frequencies. With an enclosure that is designed to withstand harsh environments, this antenna can support demanding indoor or outdoor applications in next-generation wireless communication systems. Includes 15-foot (LMR240) pigtails terminated with RPSMA Male connectors.

Terrawave by Ventev's 6 dBi Outdoor Multiple-Input and Multiple-Output (MIMO) Omnidirectional Antenna is designed to operate enterprise class 802.11n MIMO access points. With dual-band leads, each cable supports both 2.4 and 5 GHz, making it an ideal and aesthetically pleasing antenna to support demanding outdoor applications in next generation IEEE 802.11n wireless communication systems. The rugged enclosure makes this antenna perfectly suited for use in a warehouse or manufacturing environment where it must withstand exposure to moisture and dust. Includes an L-Bracket for mast and or wall mounting. Industrial beam clamps are available as an additional option.

Terrawave by Ventev's 6 dBi outdoor quad omnidirectional Wi-Fi antenna offers a four-in-one solution with two diversity antennas in a single unit. This antenna features two integrated 2.4 GHz 6 dBi elements and two 5 GHz 6 dBi elements arranged in one enclosure. The ruggedized enclosure makes this antenna perfectly suited for use in a warehouse or manufacturing environment where it must withstand exposure to moisture and dust. Includes an L-Bracket for mast mounting and a convenient beam clamp.

Ventev's Dual Band 6 dBi Outdoor MIMO Omni Antenna is designed to operate enterprise-class 802.11ac/802.11n MIMO access points. With dual-band leads, each of the four cables supports both 2.4 and 5 GHz, making it an ideal and aesthetically pleasing antenna to support demanding outdoor applications. The rugged enclosure makes this antenna perfectly suited for use in a warehouse or manufacturing environment where it must withstand exposure to moisture and dust. Includes an L-Bracket for mast and or wall mounting. Industrial beam clamps are available as an additional option.

Ventev's small form factor Wi-Fi Omni antenna provides outstanding RF coverage in a small, attractive package.  The antenna is designed to operate with modern enterprise class access points, and each of its four dual-band leads support both 2.4 and 5 GHz signals. The antenna's reduced size and  clean appearance, combined with excellent performance and durability, make it ideal for warehouse and manufacturing deployments. Includes an L-Bracket for mast and or wall mounting.

Terrawave by Ventev's 2.4/5GHz 6dBi Omnidirectional Wi-Fi antenna is designed to operate with Cisco's latest 802.11AXE access points. The antenna's rugged materials and construction make it ideal for warehouse, manufacturing, and outdoor environments where it must withstand moisture, wind, sun, and dust.

Ventev's 2.4/5 GHz 6 dBi outdoor MIMO omnidirectional antenna is designed to operate enterprise class 802.11n MIMO access points (APs). With dual-band leads, each of the four (4) cables supports both 2.4 and 5 GHz, making it an ideal and aesthetically pleasing antenna to support demanding outdoor applications in next generation IEEE 802.11n wireless communication systems. Specifications include vertical polarization, 50 Ohm, ≤ 2.0 / ≤ 2.2 along with 10 W maximum input power. The rugged radome makes this antenna perfectly suited for use in a warehouse or manufacturing environment where it must withstand exposure to moisture and dust. An L-Bracket is included for mast and/or wall mounting. Industrial beam clamps are available as an additional option. RoHS compliant. Dimensions: 5.9 x 7 in

TerraWave by Ventev's 2.4/5 GHz 6 dBi Wi-Fi 4" Small Form Factor Omnidirectional Wi-Fi antenna's small size and clean appearance, combined with excellent performance, make it ideal for deployments ranging from large office spaces to warehouse or manufacturing environments where space is limited, or visual appeal is important. The 4 dual-band leads support all 802.11ac radio chains (2.4 or 5 GHz) and enable spatial multiplexing.  An L-bracket with mounting hardware is included to support mast and/or wall mounting.

Ventev's 2.4/5 GHz 6 dBi outdoor omnidirectional Wi-Fi antenna is designed to operate with Cisco's latest access points. The antenna's materials and construction makes it perfectly suited for warehouse, manufacturing, and outdoor environments where it must withstand moisture, wind, sun, and dust. The 4 dual-band leads deliver exceptional performance while simplifying connection to the access point. An L-bracket with mounting hardware is included to support mast and/or wall mounting.

TerraWave by Ventev's 6 dBi outdoor quad omnidirectional Wi-Fi antenna offers a four-in-one solution with two diversity antennas in a single unit. This antenna features two integrated 2.4 GHz 6 dBi elements and two 5 GHz 6 dBi elements arranged in one enclosure. The ruggedized enclosure makes this antenna perfectly suited for use in a warehouse or manufacturing environment where it must withstand exposure to moisture and dust. Includes an L-Bracket for mast mounting and a convenient beam clamp.

TerraWave by Ventev's 2.4/5GHz 6dBi Omnidirectional Wi-Fi antenna is designed to operate with Cisco's 9130AXE access point (AP).  The antenna's materials and construction make it perfectly suited for warehouse, manufacturing, and outdoor environments where it must withstand moisture, wind, sun, and dust.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Omnidirectional Wi-Fi Antenna for HID Light Globes transforms outdoor light globes into Wi-Fi hot spots. The antenna is designed to operate with Cisco's outdoor access points. This unique antenna installs inside outdoor lighting globes to provide concealed, high-performance Wi-Fi that blends inconspicuously into the environment. The antenna unit, with integrated mount and radiating elements, delivers assembled and installs around and secures to the light globe's internal conduit.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Wi-Fi Omnidirectional antenna is designed to operate with the Meraki MR42e access point (AP). The antenna's materials and construction make it perfectly suited for warehouse, manufacturing, and outdoor environments where it must withstand moisture, wind, sun, and dust.

Ventev's 2.4/5 GHz 6 dBi outdoor omnidirectional Wi-Fi antenna is designed to operate with any manufacturer's 6 lead access points (APs). The antenna's materials and construction make it perfectly suited for warehouse, manufacturing, and outdoor environments where it must withstand moisture, wind, sun, and dust. The 6 dual-band leads deliver exceptional performance while simplifying connection to the access point. Specifications include vertical polarization, 50 Ohm,  ≤ 1.5 - 2.0 VSWR along with 10 W maximum input power. An L-bracket with mounting hardware is included to support mast and/or wall mounting.

Ventev's 6 dBi outdoor multiple-input and multiple-output (MIMO) omnidirectional antenna has dual-band leads to support both 2.4 and 5 GHz, making it an ideal and aesthetically pleasing antenna to support demanding outdoor applications. The rugged enclosure makes this antenna perfectly suited for use in a warehouse or manufacturing environment where it must withstand exposure to moisture and dust. Includes an L-Bracket for mast and or wall mounting.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Omnidirectional Wi-Fi antenna is designed to operate with Cisco's latest 802.11AX access points.  The antenna's materials and construction make it perfectly suited for warehouse, manufacturing, and outdoor environments where it must withstand moisture, wind, sun, and dust.

Terrawave by Ventev's 2.4/5 GHz 6 dBi omnidirectional Wi-Fi Light Pole antenna is designed to operate with any manufacturer's latest outdoor access points. This unique antenna is designed to deliver aesthetic, unobtrusive Wi-Fi connectivity in existing outdoor light poles or standard aluminum pipes. It has a circular adapter plate that seamlessly fits inside 3.75" inner diameter light poles and pipes to mount and secure the antenna. The antenna's materials and construction makes it perfectly suited for outdoor environments where it must withstand moisture, wind, sun, and dust. The antenna's radome can be painted with non-metallic paint to further increase the antenna's aesthetic appeal.

The TerraWave by Ventev dual-band 6 dBi MIMO Panel Antenna is a low profile, medium gain antenna with dual-band leads and RPSMA connectors. It is optimized for high density indoor and outdoor applications where narrow vertical and horizontal beamwidths are required. Connects to all access points with two RPSMA connectors. A universal articulating mount is included for wall or mast mounting.

Ventev's 2.4/5 GHz 6dBi Quad Patch Ceiling Mounted Antenna is ideal for high density venues such as lecture halls, auditoriums and convention centers. With dual-band leads, each cable supports both 2.4 and 5 GHz to support demanding indoor applications in 802.11n, 802.11ac and Wi-Fi 6 wireless communication systems. It features four cables with RPTNC male connectors exiting from the back of the antenna and a low profile design.

Ventev's TerraWave line of 802.11n/ac antennas are designed to operate with any manufacturer's enterprise-class 802.11n and 802.11ac access points (APs). This 2.4/5 GHz 6 dBi directional antenna features three dual-band antennas in a single unit, where each pigtail is 2.4 and 5 GHz. This solution allows engineers to simplify deployments by using only one antenna for dual band
access points.

Terrawave by Ventev's 2.4/5 GHz 6 dBi Wi-Fi Patch Antenna is ideal for high density venues such as lecture halls, stadiums and convention centers that require 2.4 /5 GHz frequency operation. It features a four-connector structure and has a low profile design with high gain. The antenna can be pole/mast mounted and includes a universal articulating mount.

Terrawave by Ventev's 2.4/5 GHz Wi-Fi quad patch antenna is designed to operate with many manufacturers' enterprise-class access points (APs). The antenna comes with four RPSMA male connectors, 36" cables, and an articulating mount. With dual-band leads, each cable supports both 2.4 and 5 GHz, making it an ideal antenna to support demanding indoor or outdoor applications in next-generation wireless communication systems. The antenna radome withstands challenging environments where this is exposure to moisture and dust. The articulating mount allows for multiple mounting options on either a wall or a mast/pole.

Terrawave by Ventev's 2.4/5 GHz 6 dBi MIMO Patch Antenna is ideal for high density venues such as lecture halls, stadiums and convention centers that require 2.4 /5 GHz frequency operation. It features a four-connector structure and  has a low-profile design with high gain.  It supports 802.11a/b/g/n and MIMO. The antenna can be pole/mast mounted and includes a universal articulating mount.

TerraWave by Ventev's 2.4/5 GHz 6 dBi directional antenna features five dual -band antennas in a single unit, where each pigtail is 2.4 and 5 GHz. This solution allows engineers to simplify deployments by using only one antenna for dual-band access points.

Ventev's 2.4/5 GHz 6-lead patch Wi-Fi antenna is designed to operate with many manufacturers' enterprise-class access points (APs). This antenna has six (6) RPSMA Male connectors, 36 in cables, and an articulating mount. With dual-band leads, each cable supports both 2.4 and 5 GHz, making it an ideal antenna to support demanding indoor or outdoor wireless communication systems. Specifications include vertical polarization, 50 Ohm along with 100 W maximum input power. The antenna's radome is designed to withstand challenging environments where there is exposure to moisture and dust. The articulating mount allows for multiple mounting options on either a wall, mast, or pole. RoHS compliant. Dimensions: 9.2 x 9.0 x 1.1 in

Ventev's 2.4/5 GHz 6 dBi indoor/outdoor quad patch antenna. This antenna features 6 RPTNC Male connectors and 36 in cables. With dual-band leads, each cable supports both 2.4 and 5 GHz, making it an ideal antenna to support demanding outdoor applications in next generation IEEE 802.11n wireless communication systems. Specifications include vertical polarization, 50 Ohm, ≤ 2.0 / ≤ 2.5 VSWR along with 100 W maximum input power. RoHS compliant. Dimesnions: 9.2 x 9.0 x 1.1 in

Terrawave by Ventev's patented Handrail Wi-Fi Antenna is designed to fit on the handrail of stadiums, arenas and other Large Public Venues (LPVs). The Handrail Wi-Fi Antenna brings Wi-Fi close to the users for improved network performance. It is weather-proof, fits any railing size and configuration and complies with safety codes and the Americans with Disabilities Act.

Ventev's Small Form Factor Outdoor Omni antenna provides outstanding RF coverage in a small, attractive package.  The antenna is designed to operate  with modern enterprise class 802.11n/ac MIMO access points, and each of its four dual-band leads support both 2.4 and 5 GHz signals. The antenna's reduced size and  clean appearance, combined with excellent performance and durability, make it ideal for warehouse and manufacturing  deployments. Includes an L-Bracket for mast and or wall mounting.

Ventev's 2.4/5 GHz 6 dBi universal antennas. This antenna includes 6 ports and has detachable pigtails/ cable assemblies (not included). This universal antenna is a future-proof design to help keep the same antenna through Wi-Fi refresh designs. Able to support Wi-Fi 6E APs with external antennas. Included is a 10" strong-arm mount for mounting.

Ventev's 2.4/5 GHz 6 dBi universal antenna. This antenna includes 6 ports and has detachable pigtails/ cable assemblies. This universal antenna is a future-proof design to help keep the same antenna through Wi-Fi refresh designs. Able to support Wi-Fi 6E APs with external antennas. Included is a 10" strong-arm mount for mounting. Cable Assemblies are sold separately.

Terrawave by Ventev's 2.4/5 GHz 6 dBi high density Directional Antenna is designed to operate with any manufacturer's six-lead WLAN access points. The antenna's gain and directional beam delivers on the modern user demand for high capacity connectivity. An articulating mount enables the antenna to position precisely where coverage is most needed, and comes with mounting hardware to support mast and/or wall mounting.

Ventev's magnet-mount Wi-Fi omnidirectional antenna is perfect for Wi-Fi deployments in both indoor and outdoor environments. This antenna is low profile to minimize space requirements and risk of impact. This antenna includes a strong magnet to ensure the antenna is installed securely.

Terrawave by Ventev's Wi-Fi Omni Grey Fiberglass Antenna is designed to operate with any manufacturer's access point that utilizes N Male connectors. This antenna operates in the 2.4 and 5 GHz frequency with a gain of 6 and 8 dBi respectively. The antenna includes a direct N Male connector and is designed to support demanding, wireless applications.

Terrawave by Ventev's 2.4/5 GHz Wi-Fi directional patch antenna is perfect for indoor and outdoor wireless applications. The antenna is mounted in a vertical configuration and consists of a low cost, high-performance design enclosed in a UV stabilized ABS plastic radome. Each antenna includes a 3' integral cable pigtail with an N Male connector.

Ventev's 2.4/5 GHz, 8 dBi Directional Antenna with 4 RPSMA Connectors mounts to glass. This antenna is designed to mount on the inside of the restaurant and connect to an indoor Access Point (AP) allowing RF propagation outside the glass. This is an ideal solution for improved communications for curbside pickup.

Terrawave by Ventev's 2.4/5 GHz, 8 dBi Directional Antenna with 4 RPTNC Connectors mounts to glass. This antenna is designed to mount on the glass inside of the restaurant and connect to an indoor AP allowing RF propagation outside the glass. This is an ideal solution for improved communications for curbside pickup.

TerraWave by Ventev's 2.4/5 GHz, 8 dBi Directional Antenna with 4 RPTNC Male Connectors can connect to any manufacturer's 802.11ac Wave I, II  or Wi-Fi 6 access points (APs) with four (4) RPTNC connector ports. The antenna provides narrow vertical and wide horizontal beamwidths which allows concise coverage for aisles and makes it ideal for warehouse deployments. The antenna ships with the Ventev 10" Strong Arm Mount (SAM). Optional Ventev mounts that are compatible with this antenna include: Industrial Articulating, Universal Articulating and High Strength Universal.

Ventev's 2.4/5 GHz, 8 dBi Directional Antenna with 6 RPSMA Connectors can connect to any manufacturer's 802.11ac Wave I, II  or Wi-Fi 6 access points (APs) with six (6) RPSMA Male connector ports. The antenna provides narrow vertical and wide horizontal beamwidths which allows concise coverage for aisles and makes it ideal for warehouse deployments. The antenna ships with the Ventev 10" Strong Arm Mount (SAM). Optional Ventev mounts that are compatible with this antenna include: Industrial Articulating, Universal Articulating and High Strength Universal.

Ventev's 2.4/5 GHz, 8 dBi Directional Antenna with 6 RPTNC Connectors can connect to any manufacturer's 802.11ac Wave I, II  or Wi-Fi 6 access points (APs) with six (6) RPTNC Male connector ports. The antenna provides narrow vertical and wide horizontal beamwidths which allows concise coverage for aisles and makes it ideal for warehouse deployments. The antenna ships with the Ventev 10" Strong Arm Mount (SAM). Optional Ventev mounts that are compatible with this antenna include: Industrial Articulating, Universal Articulating and High Strength Universal.

Terrawave Ventev's 2.4/5 GHz, 8 dBi Directional Antenna with 4 RPSMA Male Connectors can connect to any manufacturer's 802.11ac Wave I, II or Wi-Fi 6 access points (APs) with four (4) RPSMA connector ports. The antenna provides narrow vertical and wide horizontal beamwidths which allows concise coverage for aisles and makes it ideal for warehouse deployments. The antenna ships with the Ventev 10" Strong Arm Mount (SAM). Optional Ventev mounts that are compatible with this antenna include: Industrial Articulating, Universal Articulating and High Strength Universal.

Terrawave by Ventev's 2.4/5 GHz 8.5 dBi Wi-Fi Directional Antenna with 6 RPSMA Male Connectors is designed to operate with the latest 802.11ac Waves I & II and Wi-Fi 6 WLAN access points with RPSMA connectors. The antenna is multi-polarized to improve signal reception in high scatter, high density environments. The horizontal and vertical beamwidths are ideal for small sector coverage.

Terrawave by Ventev's 2.4/5 GHz 8.5 dBi Directional Wi-Fi Patch Antenna with 4x RPSMA Male connectors is designed to operate with Aruba's latest access points. The antenna is cross-polarized to improve signal reception in high scatter, high density environments. The horizontal and vertical beamwidths are ideal for small sector coverage.

Terrawave by Ventev's 2.4/5 GHz 8/6.5 dbi High Density Multiple-Input and Multiple-Output (MIMO) directional Wi-Fi antenna. The antenna's gain and narrow beamwidths delivers on the modern user demand for high capacity connectivity. The 4 dual-band leads deliver exceptional performance, and alleviate the need to buy two separate 2-lead antennas for the AP. An articulating mount and mounting hardware, which ships with the antenna, enables the antenna to be mounted and pointed precisely where coverage is most needed.

Terrawave by Ventev's 9 dBi Omni fiberglass Wi-Fi antenna offers extended wireless coverage for outdoor applications working in the 2.4/5 GHz frequency bands. This antenna features dual band functionality to support both 2.4 GHz and 5GHz, making it an ideal antenna to support demanding outdoor applications. It has a rugged exterior and includes a heavy duty mast/pole mount.

Terrawave by Ventev's compact dual-band omnidirectional antenna offers wide coverage giving the user the ease and flexibility of having only one antenna for any type of access point. It features 3.5/6 dBi gain (2.4/5 GHz frequencies) and its rugged design makes it suitable for a wide variety of applications.

Ventev's high-density 2.4/5/6 GHz panel Wi-Fi antenna is designed to operate with many manufacturers' enterprise-class access points (APs). This antenna comes with four (4) N Female connectors and a universal articulating mount. The dual-band connectors support both 2.4,5 and 6 GHz, making it an ideal antenna to support demanding indoor or outdoor Wi-Fi applications in next-generation wireless communication systems. The antenna radome is designed to withstand challenging environments where there is exposure to moisture and dust and has a wind rating of 123 mph. The universal articulating mount allows for multiple mounting options on either a wall or a mast/pole. This antenna is also dual polarized allowing for multiple positions for maximum coverage.

Ventev's high-density 2.4/5/6 GHz 13 dBi Patch Antenna is designed for wireless networks operating in the 2.4, 5 and 6 GHz frequency range in both indoor and outdoor applications. The antenna uses a narrow 35-degree beamwidth at 2.4/5/6 GHz, minimizing channel-to-channel interference which in turn leads to increased capacity

Ventev's High-Density 2.4/5/6 GHz 14 dBi Patch Antenna is designed for wireless networks operating in the 2.4 GHz, 5 GHz and 6 GHz frequency range in both indoor and outdoor applications. The antenna uses a narrow 35-degree beamwidth at 2.4/5/6 GHz, minimizing channel-to-channel interference which in turn leads to increased capacity.

Ventev's Wi-Fi Tri-Band Omni Antenna is designed to operate with any manufacturer's access point that utilizes RPSMA connectors. This antenna operates in the 2400-2500 and 5150-7125 MHz frequency range with a gain of 3/4/3.5 dBi across the band. The antenna includes a direct RPSMA Male connector and is designed to support demanding wireless applications.

Ventev's 4/6/6 dBi outdoor multiple input and multiple output (MIMO) omnidirectional antenna is designed to operate with enterprise class 802.11n MIMO access points. With dual band leads, each cable supports 2.4, 5, and 6 GHz, making it an ideal and aesthetically pleasing antenna to support demanding indoor/outdoor applications in next generation IEEE 802.11 wireless communication systems. The rugged enclosure makes this antenna perfectly suited for use in environments where it must withstand exposure to moisture and dust. Includes an L Bracket for mast and or wall mounting.

Ventev's 4/6/6 dBi outdoor multiple input and multiple output (MIMO) omnidirectional antenna is designed to operate with enterprise class 802.11n MIMO access points. With dual band leads, each cable supports 2.4, 5, and 6 GHz, making it an ideal and aesthetically pleasing antenna to support demanding indoor/outdoor applications in next generation IEEE 802.11 wireless communication systems. The rugged enclosure makes this antenna perfectly suited for use in environments where it must withstand exposure to moisture and dust. Includes an L Bracket for mast and or wall mounting.

Ventev's Tri-Band Fiberglass Antenna is designed to operate with any manufacturer's access point that utilizes N-Style Plug connectors. This antenna operates in the 2400-2500, 5150-5875 and 5925-7125 MHz frequency bands with a gain of 4, 7, and 7 dBi respectively. The antenna includes a direct N Male connector and is designed to support demanding wireless applications.

Ventev's Tri-Band Fiberglass Antenna is designed to operate with any manufacturer's access point that utilizes N-Style Plug connectors. This antenna operates in the 2400-2500, 5150-5875 and 5925-7125 MHz frequency bands with a gain of 4, 7, and 7 dBi respectively. The antenna includes a direct N Male connector and is designed to support demanding wireless applications.

Ventev's 2.4/5/6 GHz 5/6/6 dBi Directional Wi-Fi Junction Box Antenna with 8 RPSMA male connectors is concealed within a standard four-gang electrical box, and is designed to operate with any manufacturer's 8-lead access points. The antenna's cover plate looks like a standard junction box cover, providing building managers, IT network operators, and building architects with an aesthetically appealing Wi-Fi antenna that will blend into existing room decor for “out of sight" coverage and capacity. The antenna is designed to be installed within a dry wall cut-out or drop ceiling tile where the 6 ft. leads can connect to a nearby access point.

Ventev's 2.4/5/6 GHz 5/6/6 dBi Directional Wi-Fi Junction Box Antenna with 8 RPTNC male is concealed within a standard four-gang electrical box, and is designed to operate with any manufacturer's 8-lead access points. The antenna's cover plate looks like a standard junction box cover, providing building managers, IT network operators, and building architects with an aesthetically appealing Wi-Fi antenna that will blend into existing room decor for “out of sight" coverage and capacity. The antenna is designed to be installed within a dry wall cut-out or drop ceiling tile where the 6 ft. leads can connect to a nearby access point.

Ventev's 2.4/5/6 GHz 6 dBi Omnidirectional Wi-Fi antenna is designed to operate with Wi-Fi 5, 6 and 6E access points. The antenna's materials and construction make it perfectly suited for warehouse, manufacturing, and outdoor environments.

Ventev's 2.4/5/6 GHz 6 dBi Omnidirectional Wi-Fi antenna is designed to operate with Wi-Fi 5, 6, and 6E access points. The antenna's materials and construction make it perfectly suited for warehouse, manufacturing, and outdoor environments.

Ventev's small form factor Femto patch antenna with four (4) RPSMA Male Connectors offers outstanding Wi-Fi 6 performance in Ventev's smallest form factor antenna to date! Measuring 3.4 x 3.4 x 1.4 in this antenna is one-third of the size of comparable antennas on the market, making it ideal for applications where performance and aesthetics are equally important. The antenna includes a medium-strength articulating mount that articulates horizontally and vertically for precise positioning. Both the antenna and the mount are designed for use indoors or outdoors.

TerraWave by Ventev's small form factor Femto Patch Antenna with 4  RPTNC Male Connectors offers outstanding Wi-Fi 6 performance in Ventev's smallest form factor antenna to date! Measuring just 3.4" x 3.4" the antenna is one-third of the size of comparable antennas on the market, making it ideal for applications where performance and aesthetics are equally important. The antenna includes a Medium Strength Articulating Mount that articulates horizontally and vertically for precise positioning. Both the antenna and the mount are designed for use indoors or outdoors.

TerraWave by Ventev's Small Form Factor Femto Patch Antenna with 6 RPSMA Male Connectors and Medium Strength Articulating Mount offers outstanding Wi-Fi 6 performance in a small package with a rugged mounting solution. The antenna and mount combination are designed for use indoors or outdoors. The mount articulates horizontally and vertically for a variety of mounting positions and can be installed on poles or walls.

Ventev's 2.4/5/6 GHz 6 dBi Wi-Fi High Density Multiple-Input and Multiple-Output (MIMO) Directional Antenna is designed to operate with Wi-Fi 5, 6 and 6E WLAN access points. Dual polarization makes it ideal for high scatter environments. Four tri-band leads deliver exceptional performance while simplifying connection to the access point. The antenna ships with a 10" articulating Strong Arm Mount and mounting hardware to support mast and/or wall mounting.

Ventev's 2.4/5/6 GHz 6dBi High Density directional Wi-Fi antenna is designed to operate with Cisco's latest access points. The antenna's gain and directional beam delivers on the modern user demand for high capacity connectivity. Four tri-band leads deliver exceptional performance while simplifying connection to the access point. An articulating mount enables the antenna to be pointed precisely where coverage is most needed, and comes with mounting hardware to support mast and/or wall mounting.

Ventev's 2.4/5/6 GHz 6dBi High Density directional Wi-Fi antenna is designed to operate with the latest access points. The antenna's gain and directional beam delivers on the modern user demand for high capacity connectivity. Four tri-band leads deliver exceptional performance while simplifying connection to the access point. An articulating mount enables the antenna to be pointed precisely where coverage is most needed, and comes with mounting hardware to support mast and/or wall mounting.

Terrawave by Ventev's Wi-Fi 6e dual-polarized panel antenna is designed to future-proof your wi-fi deployments. With 8 ports total, 4 of these ports cover the 2.4 and 5-6 GHz bands while the
other 4 cover only the 5-6 GHz bands. This antenna is ideal for outdoor applications with its UV-resistant ABS radome. Included are 8 RG58 cables with RPTNC Male connectors as well as our 10"
strong arm mount (SAM).

Ventev's Tri-Band Micro Omni MIMO Antenna is optimized for small form factor/aesthetic and mobile Wi-Fi applications. This aesthetically-pleasing antenna includes four tri-band Wi-Fi pigtails and RPSMA connectors. The antenna is an ideal partner for four connector tri-band Wi-Fi access points where low profile and/or aesthetics is a major deployment consideration. This multi-use antenna can also be used in vehicles for communications, location tracking, and fleet management.

TerraWave by Ventev's 2.4/5/6 GHz 6dBi Omnidirectional Wi-Fi antenna is designed to operate with Cisco's 9130AXE access point (AP). The antenna's materials and construction make it perfectly suited for warehouse, manufacturing, and outdoor environments where it must withstand moisture, wind, sun, and dust.

Ventev's Multi-Mounted Wi-Fi Patch Antenna with 8 RPTNC Male Connectors offers outstanding Wi-Fi performance in a small form factor design making it ideal for applications where performance and aesthetics are equally important. The antenna can be mounted to the ceiling and also includes a Medium Strength Articulating Mount that articulates horizontally and vertically for precise positioning.

Ventev's 2.4/5/6 GHz, 8 dBi Directional Antenna with 4 RPSMA Connectors can connect to any manufacturer's 802.11ac Wave I, II, Wi-Fi 6, or Wi-Fi 6E access points (APs) with 4 RPSMA connector ports. The antenna provides narrow vertical and wide horizontal beamwidths which allows concise coverage for aisles and makes it ideal for warehouse deployments. The antenna ships with the Ventev 10 in. Strong Arm Mount (SAM). Optional Ventev mounts that are compatible with this antenna include: Industrial Articulating, Universal Articulating, and High Strength Universal.

Every Ventev antenna is covered by the company's two-year warranty program.

Terrawave by Ventev's patent-pending Raised Access Floor Wi-Fi Antenna embeds Ventev's proprietary antenna technology into Global IFS® TecCrete® Access Flooring 1250 panels.  The Access Floor Antenna is typically deployed in raised-floor environments, such as offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter.  Deployed under a variety of fabrics and finishes, this antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

Terrawave by Ventev's Pico Patch 2 Antenna delivers outstanding Wi-Fi performance in a very small package and is ideal for space constrained environments or environments that place a premium on aesthetics. It can be mounted on ceiling tiles.

Terrawave by Ventev's 5 GHz 18.5 dbi high gain, dual-polarized Directional Wi-Fi Antenna with 4 N Female Connectors can connect to any manufacturer's WLAN access points. The antenna provides the very high gain and very narrow beamwidths that are required to support ultra-high capacity wireless networks. Cross-polarization ensures excellent performance in high scatter environment. The antenna's rear plate has 4 studs for a variety of antenna mounting options (sold separately). Optional Ventev mounts include: Industrial Articulating Mount (SKU 565992), 10" Strong Arm Mount (SKU 287936), or the 18" Strong Arm Mount (SKU 220743).

Ventev's high quality 5 GHz rubber duck antenna offers wide coverage at an outstanding value. These affordable antennas are rugged and flexible, making them suitable for a wide variety of WLAN applications. Each antenna features a flexible articulating mount and an RPSMA male connector.

This Ventev antenna is RoHS compliant. Ventev antennas have been evaluated for compliance with the Reduction of Hazardous Substances, RoHS 3 Directive 2015/863/EU and have been determined to not contain substances in excess of RoHS 3 Maximum Concentration Levels.

Terrawave by Ventev's 5 GHz Patch Antenna is designed to operate with many manufacturers' enterprise-class access points (APs). The antenna features three integrated 5 GHz patch Wi-Fi antennas in one enclosure, making it an ideal and aesthetically pleasing antenna to support demanding indoor or outdoor Wi-Fi applications in next generation wireless communication systems. Includes Ventev's Universal Articulating Mount for an easy and flexible wall/mast mount installation.

Terrawave by Ventev's Pico Patch 2 Antenna delivers outstanding Wi-Fi performance in a very small package and is ideal for space constrained environments or environments that place a premium on aesthetics. The versatile Pico Patch 2 Antenna is for use indoors and is primarily designed to operate with access points with RPSMA ports. It can be mounted on ceiling tiles.

Terrawave by Ventev's 5 GHz 7dBi Small Form Factor Pico Patch Antenna delivers outstanding Wi-Fi performance in a very small package and is ideal for space constrained environments or environments that place a premium on aesthetics. The versatile Pico Patch Antenna is for use indoors and is designed to operate with Cisco access points. It can be mounted on ceiling tiles.

Ventev's ultra-wideband rubber duck antenna covers the 617-6000 Mhz frequency range. This rubber duck antenna is ideal for 5G, 4G LTE, Wi-Fi, CBRS, and LAA bands. This antenna also includes a high performance with 1.5/3 dBi gain. Its swivel design offers horizontal and vertical orientation to provide flexibility. A N-Male connector is included with this antenna.

Ventev's ultra wide band rubber duck antenna covers the 617-6000 Mhz frequency range. This rubber duck antenna is ideal for 5G, 4G LTE, Wi-Fi, CBRS, and LAA bands. This antenna also includes high performance with 1.5/3 dBi gain. It's swivel design offers horizontal, vertical or 45° orientation to provide flexibility. A SMA male connector is included with this antenna.

Ventev's ultra-wideband rubber duck antenna covers the 617-6000 Mhz frequency range. This rubber duck antenna is ideal for 5G, 4G LTE, Wi-Fi, CBRS, and LAA bands. This antenna also includes a high performance with 1.5/3 dBi gain. Its swivel design offers horizontal and vertical orientation to provide flexibility. A TNC male connector is included with this antenna.

Ventev's Access Floor Box with Integrated 5/6 dBi Junction Box Antenna Wi-Fi Antenna embeds Ventev's proprietary antenna technology into the Atkore CII ASM High Capacity 2000 Access Floor Box. The Access Floor Box is typically deployed in raised-floor environments, such as data centers, offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this access box will withstand normal office activities, including proper load bearing, with no performance degradation.

Terrawave by Ventev's patent-pending TerraWave Raised Access Floor Wi-Fi Antenna embeds Ventev's proprietary antenna technology into Global IFS® TecCrete® Access Flooring 1250 panels.  The Access Floor Antenna is typically deployed in raised-floor environments, such as offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter.  Deployed under a variety of fabrics and finishes, this antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

Terrawave by Ventev's patent-pending TerraWave Raised Access Floor Wi-Fi Antenna embeds Ventev's proprietary antenna technology into Global IFS® TecCrete® Access Flooring 1250 panels. The Access Floor Antenna is typically deployed in raised-floor environments, such as offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

Terrawave by Ventev's patent-pending TerraWave Raised Access Floor Wi-Fi Antenna embeds Ventev's proprietary antenna technology into Global IFS® TecCrete® Access Flooring 1500 panels. The Access Floor Antenna is typically deployed in raised-floor environments, such as offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

Terrawave by Ventev's patented Raised Access Floor Wi-Fi Antenna embeds Ventev's proprietary antenna technology into ASM AL80000W Access Flooring panels. The Access Floor Antenna is typically deployed in raised-floor environments, such as offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

Ventev's Access Floor Box with Integrated 6 dBi Junction Box Antenna Wi-Fi Antenna embeds Ventev's proprietary antenna technology into the Atkore CII ASM High Capacity 2000 Access Floor Box. The Access Floor Box is typically deployed in raised-floor environments, such as data centers, offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this access box will withstand normal office activities, including proper load bearing, with no performance degradation.

Ventev's Access Floor Box with Integrated 5/6 dBi Junction Box Antenna Wi-Fi Antenna embeds Ventev's proprietary antenna technology into the Atkore CIIASM High Capacity 2000 Access Floor Box. The Access Floor Box is typically deployed in raised-floor environments, such as data centers, offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this access box will withstand normal office activities, including proper load bearing, with no performance degradation.

Ventev's patent-pending RF Friendly Raised Access Floor Tile is used in conjunction with access points (APs) with internal antennas to provide floor to ceiling Wi-Fi coverage. Ventev embeds RF “friendly" windows into Global IFS® TecCrete® Access Flooring 1250 panels. The panels are typically deployed in raised-floor environments, such as offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this panel will withstand normal office activities, including proper load bearing, with no performance degradation.

Ventev's patent-pending RF Friendly Raised Access Floor Tile is used in conjunction with access points with internal antennas to provide floor to ceiling Wi-Fi coverage. Ventev embeds RF &ldquoo;friendly" windows into Global IFS® TecCrete® Access Flooring 1500 panels. The panels are typically deployed in raised-floor environments, such as offices, schools, libraries, museums, and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this panel will withstand normal office activities, including proper load bearing, with no performance degradation.

Ventev's TerraWave® 2.4/5 GHz 6 dBi Small Form Factor Nano Patch Antenna delivers outstanding Wi-Fi performance in a very small package and is ideal for space constrained environments or environments that place a premium on aesthetics. The versatile nano patch antenna is for use indoors and is primarily designed for use with Cisco 2602e, 2702e, 3602e, 3702e,and 3802e access points. It can be mounted on walls or ceiling tiles.

Ventev's TerraWave® small form factor (SFF) Atto Patch Antenna with 4 RPSMA Male Connectors offers outstanding Wi-Fi performance in Ventev's smallest form factor antenna to date! Measuring just 3" x 3", the antenna is one third of the size of comparable antennas on the market, making it ideal for applications where performance and aesthetics are equally important. The antenna includes a medium strength articulating mount that articulates horizontally and vertically for precise positioning. Both the antenna and the mount are designed for use indoors or outdoors.

Ventev's TerraWave® small form factor (SFF) Atto Patch Antenna with 4 RPTNC Male Connectors offers outstanding Wi-Fi performance in Ventev's smallest form factor antenna to date! Measuring just 3" x 3", the antenna is one third of the size of comparable antennas on the market, making it ideal for applications where performance and aesthetics are equally important. The antenna includes a medium strength articulating mount that articulates horizontally and vertically for precise positioning. Both the antenna and the mount are designed for use indoors or outdoors.

Ventev's TerraWave® Tate Access Floor Box with Integrated 5/6 dBi Wi-Fi Junction Box Antenna embeds Ventev's proprietary antenna technology onto the Atkore CII ASM High Capacity 2000 Access Floor Box. The Access Floor Box is typically deployed in raised-floor environments, such as data centers, offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this access box with antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

Ventev's TerraWave® Tate Access Floor Box with Integrated 5/6 dBi Wi-Fi Junction Box Antenna embeds Ventev's proprietary antenna technology onto the Atkore CII ASM High Capacity 2000 Access Floor Box. The Access Floor Box is typically deployed in raised-floor environments, such as data centers, offices, schools, libraries, museums and casinos, where aesthetics and an open environment matter. Deployed under a variety of fabrics and finishes, this access box with antenna will withstand normal office activities, including proper load bearing, with no performance degradation.

The Universal Articulating Mount with Large Joiner has several mobility points to give you the flexibility to create a versatile mount for Ventev antennas.

Ventev's High Strength Universal Articulating Mount offers a rugged installation solution for pole or wall-mounted antennas and other WLAN accessories that may be installed in challenging environmental conditions. The stainless steel mount and accompanying stainless steel mounting hardware create a strong, reliable mounting platform. The mount articulates horizontally and vertically for extremely flexible mounting positions and accommodates most types of low-profile antennas – regardless of polarization for both indoor and outdoor applications.

Ventev's VenFlex™ mount enables the mounting of either an access point or an antenna in a variety of ways, including I-beam mount, flat wall/ceiling mount, outlet box mounting (single and double gang, 4 in. junction box), hanging conduit, and hanging all-thread. For more specialized use cases, accessories such as articulating mounts can be attached to the VenFlex mount.

Ventev's VenFlex™ mount enables the mounting of either an access point or an antenna in a variety of ways, including I-beam mount, flat wall/ceiling mount, outlet box mounting (single and double gang, 4 in. junction box), hanging conduit, and hanging all-thread. For more specialized use cases, accessories such as articulating mounts can be attached to the VenFlex mount.

Includes two(2) VenVolt 2 Battery packs and Ventev Backpack.

Offer is good for limited time only.

The new VenVolt 2 is Ventev's next-generation battery pack engineered to power 802.3af/at/bt (Type 4 - 90W) access points while conducting site surveys, as well as other mobile devices such as laptops, tablets, and cellphones. It features a state-of-the-art 26400mAh/98Wh Lithium Polymer Battery with excellent thermal stability and high-power capacity, that safely charges and discharges. Additional features include a 56V PoE output and three USB ports. The streamlined VenVolt 2 is protected by a durable aluminum casing and includes a carry case that mounts to a pole during surveys.

Ventev's Warehouse Starter Kit includes:

• Wi-Fi Directional Warehouse Antenna Qty. 1

• Multi-Connector Co-Location Mount Qty. 1

• 2 ft 100 Series Cable Assembly with N Male – RPTNC Male Connectors Qty. 4

Take advantage of $100 savings with the starter kit.

Ventev 10" Strong Arm Mount for Directional Wi-Fi Antennas positions an antenna precisely for optimum coverage and minimal interference.

• Constructed of sturdy, lightweight 5052 aluminum that provides the strength to hold antennas securely while reducing the weight load on mounting surfaces.

• Mounts directly on a flush surface, or on a Ventev Two-Antenna Co-locating Mount (SKU 298415).

• Articulates horizontally and vertically to allow multiple mounting positions for ideal coverage .

• Locking screws secure the mount in position to prevent gradual “position drift."

• Hollow arm enables concealed cable management.

• Compatible with most directional antennas – regardless of polarization.

Ventev 18" Strong Arm Mount for Directional Wi-Fi Antennas positions an antenna precisely for optimum coverage and minimal interference.

• Constructed of sturdy, lightweight 5052 aluminum that provides the strength to hold antennas securely while reducing the weight load on mounting surfaces.

• Mounts directly on a flush surface, or on a Ventev Two-Antenna Co-locating Mount (SKU 298415).

• Articulates horizontally and vertically to allow multiple mounting positions for ideal coverage .

• Locking screws secure the mount in position to prevent gradual “position drift."

• Hollow arm enables concealed cable management.

• Compatible with most Ventev directional antennas – regardless of polarization.

Ventev's antenna adapter plate for the Cisco antenna AIR-ANT2566P4W-R. Dimensions are 11" (L) x 7" (W) x 1" (H). For use with Ventev's Universal Articulating Mount (not included, sold separately). The plate weight with the Universal Articulating Mount is 1.5 lbs.

Ventev's large antenna adapter plate for the Cisco patch antenna AIR-ANT2460NP-R. Dimensions are 5.78" (L) x 10.78" (W) x 0.59" (H). For use with TerraWave's Universal Articulating Mount (not included, sold separately). The plate weight with the Universal Articulating Mount is 1.5 lbs.
Compatible with SKU 384807.

Ventev's antenna adapter plate for the Cisco antenna AIR-ANT2566D4M. The plate's dimensions are 10 3/8" (L) x 10 3/8" (W) x 3/8" (H). The adapter plate is intended to be used with the universal articulating mount (not included, sold separately), and enables secure mounting of the antenna on flat surfaces and poles. The plate weight with the Universal Articulating Mount is 1.5 lbs.

Ventev's small antenna adapter plate for the Cisco patch antenna AIR-ANT5160NP-R. Dimensions are 4.02" (L) x 7.01" (W) x 0.59" (H). For use with Ventev's Universal Articulating Mount (not included, sold separately). The plate weight with the Universal Articulating Mount is 1 lb.

Ventev's antenna adapter plate for the Cisco patch antenna AIR-ANT2566P4W-R is white and measures 11" (L) x 7" (W) x 1" (H).

Ventev's Medium Strength Universal Articulating Mount offers a rugged solution for mounting Ventev's Micro Patch Antenna (SKU524086). The steel mount and accompanying mounting hardware create a strong, reliable mounting platform. The mount articulates horizontally and vertically for extremely flexible mounting positions. Can be used for both indoor and outdoor applications.

Ventev's circular antenna adapter plate is designed for most small and medium-sized antennas. The adapter plate dimensions are 4.5" in diameter and less than ¼" thick. Included with the adapter plate are four screws with anchors. The mounts are white powder coated to minimize the aesthetic effect.

Ventev's Single-Axis Co-Locating Mount for Cisco 2800/3800 access points (AP) and antennas simplifies deployments, improves network performance, and presents an aesthetically pleasing appearance.

Ventev's Two-Antenna Co-Locating Mount is intended to mount a Cisco 3802e and two Strong Arm Mounts. The Mount positions an access point (not included) horizontally in the center section of the bracket and two Strong Arm Mounts (not included) on either side. Supports the 3802e when it is using its standard external antenna ports along with the DART Connector/Jumper.

• Enables physical separation of the antennas for creation of Macro / Macro cell configurations in stadiums, warehouses, and other industrial locations.

Strong Arm Mounts (not included) hold Ventev Directional Antennas.


Note: Hardware to attach Co-Locating Mount to flush surface not included.

Ventev's Co-Locating Mount is designed to simplify deployments and reduce cable loss by placing the access point and antenna inches apart. The mount consists of a baseplate that attaches directly to the AP and allows mounting on or above ceiling tiles, and an antenna mounting tray that articulates +/- 25 degrees for precise beam positioning. The locking screws lock and hold the antenna mounting tray in position so the antenna's position will not drift and will provide precise coverage over time. The mount hosts all Aruba 100, 200, and 300 series indoor access points, Aerohive's 121, 230, 330, and 390 access points, and Samsung's 303e and 403e access points.

Ventev's Co-Locating Mount is designed to simplify deployments and reduce cable loss by placing the access point and antenna inches apart. The mount consists of a baseplate that attaches directly to the AP and allows mounting on or above ceiling tiles, and an antenna mounting tray that articulates +/- 25 degrees for precise beam positioning. The locking screws lock and hold the antenna mounting tray in position so the antenna's position will not drift and will not drift over time. The mount hosts all Aruba 100, 200, and 300 series indoor access points, Aerohive's 121, 230, 330, and 390 access points, and Samsung's 303e and 403e access points. The mount also hosts Ventev Antennas, and several Aruba antennas, including the ANT-48 and ANT-4x4-5314 antennas.

Ventev's Single-Axis Co-Locating Mount with I-Beam Clamp for Cisco 3802e access point and antennas is an elegant solution designed to simplify deployments, improve network performance, and present an aesthetic appearance. The Co-Locating Mount eliminates long coaxial cable runs between the access point and the external antenna, and the I-beam clamp enables fast, simple attachment to overhead I-beams. The antenna mounting tray articulates +/- 55 degrees for precise beam positioning, and places the access point and antenna inches apart to reduce signal attenuation, significantly improving network performance. The AP and the cables are concealed behind the antenna for a more aesthetically pleasing appearance.

Ventev's Co-Locating Mount with Two 10" Strong Arm Mounts Kit for Cisco 3802e offers unprecedented flexibility to install an access point and two antennas together, and then position them optimally for high-performance Wi-Fi. The access point mounts in the center section of the bracket, and brackets on each side host two Strong Arm Mounts. Directional antennas (not included) attach to the Strong Arm Mounts, and the entire pre-assembled unit is mounted to a flat, horizontal surface. Enables separation of the antennas for creation of Macro / Macro cell configurations in stadiums, warehouses, and other industrial environments when the 3802e is using its standard external antenna ports along with the DART Connector/Jumper.

Ventev's Dual-Axis Co-Locating Mount for Cisco 2800/3800 access points (AP) and antennas simplifies deployments, improves network performance, and presents an aesthetically pleasing appearance.

The Ventev I-Beam Spring Mount is designed to mount antennas on I-Beams in high-traffic areas. The mounting spring allows the antenna to flex if bumped to prevent damage. The mount is made of low-carbon steel and has a powder coat that provides environmental protection and aesthetic appeal.

The Ventev I-Beam Spring Mount is designed to exclusively mount the Cisco AIR-ANT2544V4M-R Omnidirectional antenna on I-Beams in high-traffic areas. The mount spring allows the antenna to flex if bumped to prevent damage. The mount is made of low carbon steel and has a powder coat that provides environmental protection and aesthetic appeal.

The Ventev I-Beam Spring Mount is designed to exclusively mount the Cisco AIR-ANT2547VG-N Stick Omni antenna on I-Beams in high-traffic areas. The mount spring allows the antenna to flex if bumped to prevent damage. The mount is made of low carbon steel and has a powder coat that provides environmental protection and aesthetic appeal.

Ventev's Universal Articulating Mount is designed for maximum durability and offers the flexibility to precisely position the antenna both vertically and horizontally. The mount is designed to work with a large variety of Ventev antennas.

Compatible with SKUs 574960, 529259, and 575740.

Ventev's L-Mounting Bracket with center conduit hole for Ventev Wi-Fi Micro Omni Antennas is designed to provide secure mounting options for the following Ventev Wi-Fi Micro Omni antennas. The mount is constructed of galvanized steel and is optimized for use on masts and walls.

Terrawave by Ventev's Wi-Fi Micro Omni Antenna L-Mounting Bracket is designed to provide secure mounting options for the following Ventev Wi-Fi Micro Omni antennas SKUs: 520174, 520175, 539825, and 539824. The mount is constructed of galvanized steel and is optimized for use on masts and walls.

Ventev's Above Ceiling Tile Mounting bracket is designed to securely mount equipment, such as WLAN access points (APs), up above a ceiling tile grid. It includes 10" long bolts to conveniently and securely mount APs upside down for APs with integrated antennas. Additionally, this above ceiling tile mount is an excellent method to mount APs being deployed with rubber ducks above a ceiling tile for a virtually hidden WLAN.

Ventev's Above Ceiling Tile Mounting bracket is designed to securely mount equipment, such as WLAN access points and antennas, above a ceiling tile grid.

Ventev's Above Ceiling Tile Mounting plate is designed to securely mount equipment, such as WLAN access points (APs), up above a ceiling tile grid. This plate is designed for use with APs that do not already include a mounting bracket. Includes 4 self-tapping screws to secure the AP or other WLAN equipment to the plate and two wing nuts to secure the plate to either the TW-AC-BKT or TW-AC-BKT-L. Additionally, this above ceiling tile plate is an excellent method to mount APs being deployed with rubber ducks above a ceiling tile for concealed WLAN.

Ventev's rectangular antenna adapter plate is designed for most small and medium-sized, rectangular-shaped antennas. The adapter plate dimensions are 6.25" long by 3.75" wide and less than ¼" thick. Included with the adapter plate are 4 screws with anchors. The mounts are white powder coated to minimize the aesthetic effect.

Ventev's medium-strength universal articulating mount is designed to mount your antenna in most applications.

Ventev's high gain directional antenna covers the 3300-3800 MHz range, supporting CBRS and 3.45 MHz spectrum. This antenna is ideal for CBRS networks in outdoor environments and Large Public Venues. This antenna has a cross-pol design with 14 dBi in a small form factor.

Ventev's high gain (9 dBi) outdoor omnidirectional antenna is perfect for supporting CBRS deployments as well as the 3.45 GHz spectrum. It is ideal for a wide range of private LTE deployment cases both indoor and outdoor. The antenna operates in the 3300-3800 MHz frequency range. A white radome made from polycarbonate helps withstand outdoor weather.

Ventev's 617-960/1700-2700/3300-4000 MHz 3/4/5 dBi Low Profile Ceiling Tile Antenna is designed for indoor wireless networks operating in the LTE, AWS-3, WCS, 5G, and CBRS frequency bands. This antenna is ideal for any indoor wireless 2-port MIMO system. The low PIM design with 12" Plenum rated cables is aesthetically pleasing.

Ventev's 617-960/1700-2700/3300-4000 MHz 3/4/5 dBi Low Profile Ceiling Tile Antenna is designed for indoor wireless networks operating in the LTE, AWS-3, WCS, 5G and CBRS frequency bands. This antenna is ideal for any indoor wireless 2-port MIMO system. Low PIM design with 12" Plenum rated cables is aesthetically pleasing.

Ventev's 2x2 MIMO Ultra-Wide Band Indoor Omni is ideal for public safety and cellular DAS applications. This Omni antenna covers the 617-6000 Mhz frequency ranges. It is designed with low PIM, and a high gain design. With an N Female connector, this antenna can be ceiling or surface-mounted.

Ventev's Ultra wide band SISO indoor Omni is an ideal antenna for indoor cellular and public safety DAS applications. This antenna covers the 617-6000 MHz range. With its low PIM and high gain design, this Omni provides excellent pattern performance along with market competitive specs. With its slim design, this antenna is aesthetic-driven for deployments where the antenna can be ceiling or surface-mounted.

Ventev's Ultra wide band SISO indoor Omni is an ideal antenna for indoor cellular and public safety DAS applications. This antenna covers the 617-6000 MHz range. With its low PIM and high gain design, this Omni provides excellent pattern performance along with market competitive specs. With its slim design, this antenna is aesthetic-driven for deployments where the antenna can be ceiling or surface-mounted. Included is an N Female connector.

Ventev's 2x2 MIMO Ultra-Wide Band Indoor Omni is ideal for public safety and cellular DAS applications. This Omni antenna covers the 617-6000 MHz frequency ranges. It is designed with low PIM, and a high gain design. With a 4.3-10 female connector, this antenna can be ceiling or surface-mounted.

Ventev's 617-960/1710-2700/3300-3800 MHz Omnidirectional Antenna is designed for outdoor wireless networks operating in the LTE, 4G, 5G and CBRS frequency ranges. The antenna's polycarbonate radome provides extra durability in outdoor environments and is ideal for the most demanding, mission critical communications. This antenna includes a L Bracket for Wall, Pole/Mast Mount.

Ventev's 698-2700/3300-3800 MHz 7/9dBi Directional LTE/CBRS Antenna with 2x N Female connectors is designed to be operated with outdoor wireless networks operating in the LTE, GSM, CDMA, PCS, 3G, and 4G frequency ranges. This antenna is ideal for outdoor voice and data deployments in remote, rural, industrial, and donor antenna deployments. The antenna's rugged radome protects the antenna's radiators from sun, wind, rain, snow, and dust, and the adjustable mounting bracket enables precise antenna positioning for optimal connectivity.

Ventev's high gain directional antenna supports the 698-2700 & 3300-4200 MHz frequency range. This antenna is suitable for indoor/outdoor networks operating in the LTE, GSM, CDMA, PCS, 3G, and 4G frequency ranges. It is ideal for outdoor voice and data deployments in remote, rural, industrial, and donor antenna deployments. The rugged construction of the antenna provides protection from all outdoor elements.

Ventev's SISO Indoor Omni is ideal for public safety and cellular DAS applications. With an ultra-wideband frequency, covering the 617-6000 MHz range this antenna can cover all your needs. It contains a low, PIM, high gain design with excellent pattern performance to cover market competitive specifications. This antenna comes with 1 N Female connector and a 12" plenum-rated pigtail. It can be ceiling or surface-mounted, depending on your applications.

Ventev's SISO Indoor Omni is ideal for public safety and cellular DAS applications. With an ultra-wideband frequency, covering the 617-6000 MHz range this antenna can cover all your needs. It contains a low, PIM, high gain design with excellent pattern performance to cover market competitive specifications. This antenna comes with 1 4.3-10 female connector and a 12" plenum-rated pigtail. It can be ceiling or surface-mounted, depending on your applications.

Ventev's 617-960/1700 2700/3300-4200 MHz LTE/ CBRS 3/5/6 dBi Ceiling Tile Mount Antenna is designed for indoor wireless networks operating in the LTE or CBRS frequency range. This antenna is ideal for any indoor voice and data wireless system. Includes a 4.3-10 Female connector, 12" Plenum rated cable, and a ceiling tile mount. The horizontal and vertical beamwidths are ideal for small sector coverage.

Ventev's 617-960/1700-2700/3300-4200 MHz LTE/ CBRS 3/5/6 dBi Ceiling Tile Mount Antenna is designed for indoor wireless networks operating in the LTE or CBRS frequency range. This antenna is ideal for any indoor voice and data wireless system. Includes a N Female connector, 12" Plenum rated cable and a ceiling tile mount. The horizontal and vertical beamwidths are ideal for small sector coverage.

Ventev's ultra-wideband slim Omni SISO antenna is designed for in-building Public Safety and Cellular DAS applications. This antenna's low-PIM high gain design with excellent pattern performance and specifications is perfect for your indoor deployments. This antenna can be ceiling tile mounted and includes one N female connector.

Ventev's 617-960/1700-2700/3300-4000 MHz 3/4/5 dBi Low Profile Ceiling Tile Antenna is designed for indoor wireless networks operating in the LTE, AWS-3, WCS, 5G, and CBRS frequency bands. This antenna is ideal for any indoor wireless 2-port MIMO system. The low PIM design with 12" Plenum rated cables is aesthetically pleasing.

Ventev's 617-960/1700-2700/3300-4000 MHz 3/4/5 dBi Low Profile Ceiling Tile Antenna is designed for indoor wireless networks operating in the LTE, AWS-3, WCS, 5G and CBRS frequency bands. This antenna is ideal for any indoor wireless 2-port MIMO system. Low PIM design with 12" Plenum rated cables is aesthetically pleasing.

Ventev's 2x2 MIMO Ultra-Wide Band Indoor Omni is ideal for public safety and cellular DAS applications. This Omni antenna covers the 617-6000 Mhz frequency ranges. It is designed with low PIM, and a high gain design. With an N Female connector, this antenna can be ceiling or surface-mounted.

Ventev's Ultra wide band SISO indoor Omni is an ideal antenna for indoor cellular and public safety DAS applications. This antenna covers the 617-6000 MHz range. With its low PIM and high gain design, this Omni provides excellent pattern performance along with market competitive specs. With its slim design, this antenna is aesthetic-driven for deployments where the antenna can be ceiling or surface-mounted.

Ventev's Ultra wide band SISO indoor Omni is an ideal antenna for indoor cellular and public safety DAS applications. This antenna covers the 617-6000 MHz range. With its low PIM and high gain design, this Omni provides excellent pattern performance along with market competitive specs. With its slim design, this antenna is aesthetic-driven for deployments where the antenna can be ceiling or surface-mounted. Included is an N Female connector.